Washing Machine Heating Element - 2000W Stock Number: ES486173
Genuine spare part for select models of Bosch, Neff and Siemens washing machines
Overall rating
Product Reviews
Write a review-
DMH Teesside
-
M Barnett Stourbridge5.0 out of 5
Good Quality 31 January 2023
Good quality product. Fitted easily, but did utilise the "YouTube" guidance video by espares, which was excellent. Had to wait two weeks though as out of stock, which was the only negative.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
RN Portsmouth5.0 out of 5
Bosch Classixx 6 1200 fitted like a glove 19 April 2022
Brilliant service and the video really helped fitting in our Bosch Classixx 6 1200. Many thanks and saves the machine from being recycled just yet after 14 years.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
RS Nottingham3.0 out of 5
Lasted 4 years 03 January 2022
Fitted one of these in late 2017, to replace the original heater element in our Bosch WFO2864 machine which, by this date, was 15 years old. The element has just failed: - it has lasted 4 years. Not sure if 4 years is the designed service life, but it was certainly not a patch on the original!
Ease of fitting 5.0 out of 5 Quality 3.0 out of 5 Value 4.0 out of 5 -
Trevor Wing Wickford5.0 out of 5
Easy fix 17 December 2019
After following your online video replacement was easy. I would reiterate a couple of points others have made: UNPLUG IT FROM THE MAINS FIRST. When extracting the old element have a couple of bowls one at a time to collect the water which will escape probably around 1-2 litres. The old element will be a little reluctant to come out even after backing the nut right off and hitting it with wooden block and hammer so use a flat screwdriver to prise it out. If done with caution the water will drain under control. Another point which has been made but not in the video ... take the glass door off two screws and lift up and out makes it much easier to reassemble as it is quite a counter weight otherwise. So easy job took maybe 20 mins including getting the few tools together .. star drives Flat driver Hammer and pliers to squeeze the Earth terminal tight as new one was too loose. Reason for replacing the element was the machine was tripping the RCD
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
JAC France5.0 out of 5
Cheaper than a new machine! 05 January 2018
We used the espares video tutorial via youtube which was excellent. Clear and easy to follow
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Don4.0 out of 5
Probably didn't need it 08 November 2017
IMPORTANT check that your old element is actualy faulty before purchasing this. Whilst this element does what it is supposed to do, I may be jumped the gun buying it as when fitted it still would not heat the water in my machine and so I had to replace another component too (the heater element sensor, that fits in to the element itself). The machine now appears to work ( only after replacing the sensor as well), i.e the water is now heating, having a new element in a 10 year old machine is probably worth the spend as it should be more efficient at heating the water as won't be all scaled up, it could be considered not necessary as was quite expensive to purchase. As to fitting it, it was very easy, just watch the eSpares video on how to, although for a Bosch machine, you need not take the top or control panel off. I recommend you simply take the door hinge off (to allow for easier door seal re-fitting), remove the lower screw behind soap draw, and the two screws behind the bottom panel, the front panel then slides down and out with ease, refitting is straightforward too. REMEMBER though, unlike the new machine shown in the video yours will no doubt have water in it, when you remove the element a small amount of water will come out, but draining via the small hose overcomes this. Hopefully the above will be viewed as useful and constructive.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5 -
DPB Herts5.0 out of 5
Excellent service from eSpares 29 August 2017
Ordered on Monday and washing machine up and running Tuesday afternoon. Good instructions on you-tube. Only thing I might add is when refitting door seal on door apply some washing up liquid to the seal and it will slide on easily.
Ease of fitting 4.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5 -
Kitty NW Kent5.0 out of 5
Great for fixing my machine! 05 April 2017
When my washing machine stopped working it also tripped the mains rcd box. I used a search engine on the web to see if there was a solution and hey presto! There was a video by Espares demontrating what part I needed and how to fit it. Not only that, my washing machine was almost identical to the one demonstrated on! I've never fixed a washing machine before but everything went smoothly and the part fitted fine and it everything works fine!
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
HJ Hampshire.5.0 out of 5
Saved buying a new machine 16 August 2016
My Bosch washing machine was tripping the electrics in the house, after some testing and research the signs were that it was the heating element. I took a punt and decided to buy and fit the part myself. Fitting was fairly easy, the video on the eSpares web site helped a lot. Problem solved.
Ease of fitting 4.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5
Ratings-Only Reviews
| Overall Rating | 5.0 stars | 5.0 |
|---|---|---|
| Ease of fitting | 5.0 stars | 5.0 |
| Quality | 5.0 stars | 5.0 |
| Value | 4.0 stars | 4.0 |
Based on the average of 3 ratings-only reviews
Will this part fit my appliance?
Check Now- Usually despatched within 2 weeks About despatch times
- We won't be beaten on price Price match guarantee
Heater - Essential part 27 July 2023
Delivered overnight, great service. Heater fitted without problems, machine at work again within minutes of fitting.