Fridge Door Handle – White Stock Number: ES102669

Overall rating

• Saleem Cardiff
  3.0 out of 5

  Fitting handle 27 March 2016

  Good quality but both handles needed minor modification to fit. The inside curve on the left where it meets the door edge is out by about 3mm. This prevents the holes from lining up. I had to rub down and alter the edge with a file (messy) before getting the holes to be lined up for the two screws.

  Ease of fitting	1.0 out of 5
  Quality	4.0 out of 5
  Value	2.0 out of 5

• mumof276 North London
  3.0 out of 5

  fitting issues 11 May 2010

  had to adjust the product with files to get it to fit, as it was snagging alot, but once adjusted my fridge freezer looks just like new.

  Quality	4.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	2.0 out of 5

• suki5 Surrey
  3.0 out of 5

  useful product 17 March 2009

  The handles were good and easy to fit, after they had been sanded down. Luckily, I had read the reviews and knew that I would have to do it. There were no instructions or fittings with the handles which could have been a problem.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	4.0 out of 5

• Cedars Berkshire
  3.0 out of 5

  Fridge handles 11 February 2009

  We purchased fridge handles (multifit)for a fridge/freezer listed in the details. However they were not a perfect fit and had to be filed down, hence the low rating. Delivery could not be faulted.

  Quality	3.0 out of 5
  Value	2.0 out of 5
  Ease of fitting	1.0 out of 5

• MrMender Hertfordshire
  3.0 out of 5

  Bosch Fridge Freezer Door Handles 05 February 2009

  Both original handles failed about the same time, hence this purchase. They are easy to replace, but if they were designed properly, they wouldn't fail so quickly! All the load is taken at the thinnest part of the plastic where the screws fix them to the door - it's not surprising they break (especially the freezer door, which needs more force to open it). Tip: Before fitting the replacements, put a good dollop (technical term) of hot glue around the screw fitting ends. this will help spread the load at the weakest point and will hopefully last longer than a couple of years.

  Quality	3.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	5.0 out of 5

• Mike27657
  3.0 out of 5

  Fits - with some work 26 January 2009

  Handles were listed against my fridge model and turned up promptly, but wouldn't fit the doors because the shape didn't quite match the originals. I eventually had to file down the plastic slightly. Not really what I expected after forking out nearly 18 quid.

  Quality	4.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	2.0 out of 5

Ratings-Only Reviews