Washing Machine Drum Bearing & Seal Kit Stock Number: ES546635
Genuine spare part for select Ariston, Creda, Hotpoint and Indesit washing machines
Will I need a puller to remove the old bearings? (Your replacement part number: ES546635)
-
eSparesToby at eSpares says...
I've found this article, hopefully it will go some way to explaining your question. Try taking a look through our advice centre as well. http://www.diynot.com/forums/viewtopic.php?t=76862
-
Rory at eSpares says...
Hi Inde, I'll need the full model number of your machine - there should be a couple more numbers on the end. For help locating it, use our guide: http://www.espares.co.uk/findingmodelnumbers.aspx#a7
-
Rory at eSpares says...
Hi Reece1, getting to the bearings is tricky and time consuming - you have to remove the back panel. I wouldn't recommend doing it without help unless you are reasonably confident.
I need bearings for the wdg1095w indesit but iam not sure how to replace. does the bearing come out easily? or does it need a lot of pressure to preso 1 Answer
-
Rory at eSpares says...
Hi Herb You can find the correct bearing for you Indesit WDG1095W washing machine here: http://www.espares.co.uk/part/washing-machines/indesit/wdg1095w/p/1085/805/0/539656/102262/rear-drum-bearing.html This part is compatible with your machine whereas this bearing isn't. Unfortunately we do not stock seals for the Indesit WDG1095W, and this one is not compatible. However we will look to our suppliers and aim to stock one in the future. We hope your search for a seal was successful though! The bearing should be easy enough to fit, it shouldn't take a great amount of pressure. However if you have any reservations, we'd recommend you get in touch with your local Indesit technician.
Will this part fit my appliance?
Check Now