Universal Outdoor Accessories Manual Feed Trimmer Head

Stock Number: ES971078

Manufactured by Universal Powered by McCulloch

(This part fits select Universal Outdoor Accessories models)

In Stock Available for immediate despatch

Rated 4.8 out of 5 (43 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance? [?]

Click on your brand to check if this part fits your appliance

Black & Decker Trimmers Flymo Trimmers
Bosch Trimmers McCulloch Trimmers


Manual Feed Trimmer Head

If your trimmer has stopped working properly there may be a problem with it's head. You can stop worrying now as eSpares has the perfect replacement part for you. This manual feed trimmer head from Universal Outdoor Accessories will get your trimmer back to 100%.


  • Type: HDO001
  • P25
  • Cord Length: 4m
  • Cord Diameter: 2mm
  • Number of cords: 2

Genuine spare part suitable for select models of Flymo, McCulloch and other brands of trimmers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.


More product images

Product Reviews

Rated 4.8 out of 5 (43 customers)
Write a review
  • excellent product

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - workington

    the service provided was very good, would highly recomend.
  • fantastic purchase

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Devon

    Great service i was helped on the phone to find the trimmer head i needed for my strimmer, fast delivery and item perfect.
  • Universal trimmer head with adaptor kit to fit most leading brands of petrol trimmers

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - East Yorkshire

    Absolutely top class from ordering it to receiving it and fitted with ease. There was cheaper on the net but the quality of this item is top notch.I thought I would only receive the outer case but a complete unit arrived,even with strimmer wire. I wouldn't shop anywhere else when needing any spares. Well Done!!! and Thank you.

Ask & Answer

(4 Questions and 4 Answers) Ask a question
  • Q Is this a Tap and go head, bump feed?. Or manual feed? 1 Answer

    By Astranova - Harlow, Essex - 03 November 2014

    • A
      Manual feed.

      By Chris eSpares Staff - 04 November 2014

  • Q Will it fit a bent shaft maculloch strimmer 1 Answer

    By Charlie boy - Oxted surrey - 07 May 2014

    • A
      In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

      By Chris eSpares Staff - 08 May 2014

  • Q How do I change the adaptor fitting on this strimmer head? 1 Answer

    I need to change the threading on the top of the strimmer head to accept a left hand thread bolt on my strimmer. One of the adaptors (the black one) is a left hander and the correct diameter, but I can't work out how to switch adaptors. Thanks

    By Nigelew - 25 August 2013

    • A
      Hello Nigelew, I hope by now you have resolved your problem. I'm sorry I didn't get to you sooner. To replace the threading is very straight forward; first open the head as if to replace the cord. 2. Then remove the cord holder by pulling straight out. 3. This will reveal a black plastic cog wheel which is spring loaded. 4. Press down this cog wheel and move from side to side, this will loosen it up a bit and it should pull straight off revealing a spring on which the adapter is attached. 5. The adapter will pull off the spring fairly easily. 6. Replace with the correct adapter and replace black cog wheel ensuring it is lined up to the slots on the yellow base. 7. Replace cord holder. Job done. I hope this is of use to you.

      By haroldreeves - Wexford, Ireland - 12 October 2013

  • Q conversion 1 Answer

    what do i need to change my Cbrio 246 from a bruch cutter head to a strimmer cord head

    By Anonymous - 09 January 2012

    • A
      I think what you need is the part above Stock Number: ES971078. Mine came with all the parts included but the brush cutter is only really necessary for the thickest scrub with heavy shrubs. The strimmer cord head will take cord of various thicknesses and is colour coded. I use orange which I think is about 30mm and it is very effective. Best of luck.

      By Frank - West of Scotland - 23 May 2012