This is an easy fitting part and fixing your oven yourself will save you money. This replacement spare part will fit select Bosch, Neff and Siemens fan ovens. Please view the model fit list prior to purchasing this item.
Please note: Due to new UK standards this part no longer has an earth connector.
How to replace an oven element
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
QI've seen advice on other forums that suggests the existing earth wire should be connected to the fixing screws? Is that not necessary?2 Answers
- 03 November 2011
The first answer is correct, but the earth wire should have its terminal insulated with tape or block and be tucked into one of the restraining clips on the harness, so that there is no static build up danger. The earth wire must not enter the oven space as this has now been classified differently by the relevant authorities.
It is not satisfactory to connect it to the fixing screws of the element. This is why the terminal has been removed.
By Anonymous- Burley, Hampshire
- 26 July 2013
This is not necessary as the oven body is earthed.
I just covered the existing earth wire and tucked it down the back of the oven.
QThe oven main fuse has blown on three occasions now for no apparent reason. I've noticed that when the grill element is turned on the oven element also comes on is this normal or a possible fault1 Answer
Neff cooker model B1322N1GB/01
By Tony Palmer
- 04 October 2015
On convection setting it is normal for a grill and a lower oven element to heat. On a fan setting it normally will only use a fan element.
QHi , my old element has a earth connector on it but my new element hasnt can i still use the new one and were do i put the earth connector on the oven1 Answer
can i secure the earth wire to anything our can i just push it away
By colin- home
- 31 August 2011
Hi Colin, The element will earth through the m,ounting screws as long as they are tight and they screw into the main body (metal & earthed) of the oven. It always best to secure the earth cable if you are not going to use, so that it doesn't touch anything that it shouldn't.