Hotpoint Module PCB (Printed Circuit Board)

Stock Number: ES548487

Manufactured by Hotpoint

Only 10 left in stock Available for immediate despatch

Be the first to review this product

Main product image Enlarge icon enlarge image

Will this part fit my appliance? [?]

Click on your brand to check if this part fits your appliance

Ariston Washing Machines Hotpoint Washing Machines Indesit Washing Machines

Description

Washing Machine Module PCB Control Panel Fascia

This replacement Module PCB control panel is a genuine part and will fit select models of Ariston, Hotpoint and Indesit washing machines. Please check Models This Fits prior to ordering to make sure this part is right for your washing machine.

This is Hotpoint spares reference: C00112616

How to replace washing machine controls and fascia

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Ask & Answer

(6 Questions and 4 Answers) Ask a question
  • Q machine wont turn on (hotpoint wf560) 1 Answer

    no lights come on on fascia plug ok fuse ok power to main cable assembly

    By Anonymous - 22 January 2014

    • A
      For information to resolve your problem see our video: http://www.espares.co.uk/advice/7/1793/how-to-diagnose-washing-machine-control-and-program-problems

      By Chris eSpares Staff - 22 January 2014

  • Q Problem with starting the machine 1 Answer

    The on-off switch is working (and has been replaced) but the machine still doesn't want to work. Does it need to be plumbed into water supply to work? If no - will replacing the PCB be likely to work?

    By Anonymous - Bristol - 22 October 2013

    • A
      Some recent Hotpoint machines have an 'anoulogue' pressure switch that may have to be reset if the machine has been disconnected and laid down. To reset this unplug and poor 2 litres of water in the drum, switch on and select the drain function. the machine should empty and then reset. To test properly you need to plumb a supply although you can drain to a bucket during testing (raise pipe end above drum water level and make sure it doesn't overflow).

      By Chris eSpares Staff - 23 October 2013

  • Q when i turn the on swicth on it gives me problems to turn and when it is on it blowns the fuse. 1 Answer

    its a hotpoint wd440.when its pluged in its okay. but only when the switch is pressed thats when it blown the fuse. is it the board

    By dee - london - 02 May 2011

    • A
      pos not the pcb most common is the heating element short circuit or the motor, presume you not had a water leak ?

      By Billy Boy - Bicester. Oxon - 02 June 2011

  • Q do i need to programme this board? 1 Answer

    By Bobfly386 - 22 April 2010

    • A
      This PCB is already programmed.

      By eSparesMalindi eSpares Staff - 07 July 2010

  • Q ABOUT ABOVE PCB BOARD 0 Answers

    hi i have been told i cant just plug in pcb board and expect it to work ,it has to be programmed.. is this correct . or will the one you supple run straight away..?? thanks Matt

    By Anonymous - uk - 15 July 2014