Bosch Oven Lamp and Housing

Stock Number: ES539651

Manufactured by Bosch

In Stock Available for immediate despatch

Rated 4.3 out of 5 (18 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance? [?]

Click on your brand to check if this part fits your appliance

Bosch Cookers & Hobs Neff Cookers & Hobs Siemens Cookers & Hobs
Neff Cooker Hoods Siemens Cooker Hoods


Genuine replacement oven lamp and housing for select Bosch models.

Be sure to check that this part will fit your model prior to purchasing.


How to replace an oven lamp

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.3 out of 5 (18 customers)
Write a review
  • Torx T20 key required, NOT T25 as previous review

    • 3.0 out of 5
    • 3.0 out of 5
    • 3.0 out of 5
    • 3.0 out of 5

    By - Kent

    Edit to above review. We have a Neff oven which needs a T20 torx key/tool to undo all the casing screws, not a T25 as I stated above. Sorry for any confusion!
  • Does the job

    • 4.0 out of 5
    • 3.0 out of 5
    • 4.0 out of 5
    • 3.0 out of 5

    By - Kent

    The part comes complete with new bulb, glass cover and plastic glass cover removal tool. A bit fiddly to fit but easy enough once you have taken enough panels off the oven. The new fitting just pushes into place once the old one has been pushed out. Take a photo of the wiring before you pull off the spade connectors so you know the correct connections when you put it back. The replacement fitting needed to have the connectors carefully bent down so it fitted inside the casing. I was worried they might break off but they were fine. There is a terminal block that needs to be unbolted and fitted back on the new fitting but done easily enough with needle nosed pliers. You will need a T25 torx key to unbolt all the oven casing panels, they are not standard cross head screws. Good luck!
  • Bosch oven light

    • 3.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 2.0 out of 5

    By - Denbighshire

    We only needed the lamp and glass cover, but were advised that we had to buy the base housing as well, so the unit was a lot more expensive than anticipated before ordering. The removal tool, for the glass cover, was of no use as the glass dome had already shattered, and we had to remove the remaining glass with a hammer and cold-chisel. However, fitting the bulb and glass afterwards took less than a minute.

Ask & Answer

(1 Question and 1 Answer) Ask a question
  • Q does this part come with a bulb 1 Answer

    By nrllo - 18 February 2009

    • A
      Hi Nrllo, this part is the bulb, or lamp, with its housing.

      By Rory eSpares Staff - 27 March 2009