Hoover Washing Machine Rubber Door Seal

Stock Number: ES488118

Manufactured by Hoover

In Stock Available for immediate despatch

Rated 4.7 out of 5 (127 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image


Washing Machine Rubber Door Seal

Is the door seal for your washing machine looking past its best? Or have you somehow managed to damage it? No problem, eSpares may have just what you need. This genuine spare seal from Hoover could soon be fitted to ensure your old washer is back in action and ready to clean.
Genuine spare part suitable for select models of Hoover, Candy and many more brands of  washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.

How to replace a washing machine door seal - Bosch

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.7 out of 5 (127 customers)
Write a review
  • Great Service

    • 5.0 out of 5
    • 2.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Bracknell

    As expected, Great service, efficient, competent and fast delivery.
  • Washing Machine Rubber Door Seal

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - LONDON

    E spares always reliable service ,ex u tube video to help get it on . saved ££££ doing it my self :)
  • Perfect replacement

    • 5.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5


    Exact replacement part which was easy to fit although inner ring clamp nut difficult to reach ...need 7mm spanner and 7mm socket

Ask & Answer

(5 Questions and 8 Answers) Ask a question
  • Q How to fix the door seal 4 Answers

    I m using a Hoover Nextra HNF 2137S-80. Pls let me know how to fix the seal and which tools I require. Thanks

    By Giby - 23 December 2008

    • A
      Hi, I fitted one to a hoover nextra HNF7148-80. I required a 7mm spanner and socket, a screw driver to leaver the front retaining ring off and some washing up liquid to lubricate the inner door seal to help fitting. (well worth doing) Regards and good luck

      By tptclarke - Cornwall - 24 May 2010

    • A
      Strength, patience, a couple of small adjustable spanners and a flat head screwdriver. Best of luck - the online video is very helpful but it is not a 5 minute job.

      By harttss3 - Berkshire - 11 March 2010

    • A
      Washing up liquid, small screw driver, and 1/4" drive small socket (7mm and 8mm i think) and spanner

      By m4rkp - Slough - 02 March 2010

    • A
      Hi Giby This door seal is suitable for your Hoover HNF2137S-80 washing machine. For help fitting it, use our handy guide: http://www.espares.co.uk/guides/washing-machines/g/12/38/replacing-door-seals.html

      By Rory eSpares Staff - 05 January 2009

  • Q How to fit rubber seal on HJA8513 . 1 Answer

    In the video the man shows hot to remove top and front of machine but the front does,nt come off ours and also there is a retainer holding in the rubber which we can't get loose so rubber won,t come out can you help with this.

    By Anonymous - Lanarkshire - 25 January 2014

    • A
      It should be possible to carefully prise the seal retainer of the outer rim and replace the door seal through the door port hole. Although this is more awkward than the machine in the video.

      By Chris eSpares Staff - 04 February 2014

  • Q Marks on garments after they have been washed 1 Answer

    These marks are easily washed off by hand as it is like a slim ,when run under hot water it will wash away. I have cleaned out machine best I can and run on hot cycles but it still happens

    By Anonymous - Scotland - 06 January 2014

    • A
      This problem is likely to be due to a build up of mould and bacteria in the machine. Use Stock Number: ES1566874 eSpares Limescale & Detergent Remover through the machine for two or three cycles and see if this clears it. If this resolves your problem remember to leave the door and soap draw wide open after use until the machine has dried to help prevent the mould coming back.

      By Chris eSpares Staff - 08 January 2014

  • Q i have a hoover optima how difficult is it to change door seal 1 Answer

    model no hnl 6166

    By Anonymous - swansea - 01 September 2012

    • A


      Variations occur on different machines of course but the above video should be a good start for the basics.

      By Mathew eSpares Staff - 06 September 2012

  • Q I have a Hoover Optima washing machine - just under 2 years old. It is leaking from the front inside - the water coming down inside the concrete weight. It leaks when water is added to the drum by hand (jugfuls). The water pump connections are all dry. Th 1 Answer

    By BobW - North East Scotland - 24 January 2011