with wands of 30 to 37mm diameter (please see the description and video)
Universal Vacuum Cleaner Floor Tool 30-37mm
This Universal Floor Tool is an eSpares top seller and works equally well on carpeting as it does on hard floors. Designed for maximum pick-up and fast removal.
Large (270 x 87mm) for maximum pick-up of dust and dirt.
Adjustable hose fitting (30 to 37mm*) suitable for almost every make of vacuum cleaner (not Dyson). Adjust the fitting by tightening the black plastic screw cap on the threaded housing of the tool to create a smaller or larger connection and to tighten the extension tube in place.
Two swivel type buttons (brush out and brush in) on the top allow you to easily switch between brush out (normally used on hard floors) and brush in (normally used on carpets) depending on what you are using your vacuum tool for.
Please note: 30 to 37mm refers to the size of the vacuum extension tube. To measure this, measure the outside diameter of the hose connected to your vacuum.
How to replace a Henry floor tool
This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.
Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.
Anyone with a vacuum cleaner that has a faulty head and who either cant find an original replacement or the original is too expensive
By navinitram- Northamptonshire
- 21 April 2010
anyone with a broken vax floor tool
By monsterherman- wandsworth london
- 16 February 2010
We would always recommend a genuine part, instead of a universal part, for your vacuum if one is available. Please enter your model number in the search facility above to see if we carry the genuine part for your vacuum prior to ordering this universal part. If we do not carry a genuine part for your vacuum please make sure to double check the measurements of this item prior to ordering to make sure it will fit your cleaner.