Kenwood Dishwasher Thermostat for KDW12ST3A

Stock Number: ES1560613

Manufactured by Matsui

(This part fits select Kenwood models)

In Stock Available for immediate despatch

Be the first to review this product

Main product image Enlarge icon enlarge image

Will this part fit my appliance? [?]

This part is compatible with Kenwood KDW12ST3A Dishwashers

Not what you're looking for? See all parts for your appliance.

You can also check compatiblity with other Kenwood Dishwashers


Is your dishwasher heating up uncontrollably? You may well have a faulty thermostat. No need to worry, as you can get a replacement right here.

  • Type: 472854/36JH
  • Also Known As : Tstat, Stat, Cut out, Toc

This spare is a genuine part for select Kenwood and Matsui dishwashers. Please check the model fit list prior to ordering, to ensure this is the correct product for your dishwasher.

More product images

Ask & Answer

(5 Questions and 5 Answers) Ask a question
  • Q i have fitted a new through heater to dishwasher still no hot water need to know if overheat stat needs replaceing 1 Answer

    By d t cobbledick - Swindon - 18 April 2016

    • A
      For information on this problem see our diagnosis video: How to Diagnose Dishwasher leaking and heating problems

      By Chris eSpares Staff - 18 April 2016

  • Q Thermostat resistance 1 Answer

    Hi. What is the resistance of the thermostat when it is good. I have just took it out of the machine and what I can measure is more than 8kohm. I am trying to identify the problem.

    By Phoboss - Kettering - 03 May 2014

    • A
      We believe this is a simple thermostatic switch that should measure short circuit.

      By Chris eSpares Staff - 06 May 2014

  • Q KDW12SL3A kenwood Dishwasher,E3 intermittent fault 1 Answer

    Dishwasher will work fine until occasional E3 fault. Dishes are not rinsed and are cool whenever this fault occurrs. What would you suggest?

    By Dave - Lincolnshire - 13 April 2014

    • A
      Error E3 refers to a heating problem. check the thermostat below the heater on the outside of the tub is in good contact with the tub skin and not loose. Also examine the control board for signs of burning or poor connections on the relay.

      By Chris eSpares Staff - 14 April 2014

  • Q e3 error code on a kenwood dishwasher 1 Answer

    hi I changed the thermostat on my kenwood kdw12sl3a ,and the e3 error code sometimes comes on and it dosent finish the rinse cycle ,and they are not always hot either

    By baz - scotland - 26 January 2014

    • A
      There may be a 'dry joint' on the heater relay on the control board that will allow the heater to work sometimes. Check and replace if the control board if required.

      By Chris eSpares Staff - 03 February 2014

  • Q how do i fit a thermostat to my dishwasher model KDW12SL3A 1 Answer

    have just bought and fitted a heating element and the dishwasher still does not work

    By josinter - Petersfield - 06 January 2014

    • A
      This fault could be due to the heater element (already changed) . Its thermostat or cut out (normally short circuit when ok), or a fault with the control board or wiring loom.

      By Chris eSpares Staff - 07 January 2014