Universal Oven Fan Motor

Stock Number: ES1331607

Manufactured by Hotpoint

(This part fits select Neff models)

In Stock Available for immediate despatch

Rated 4.5 out of 5 (415 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image

Will this part fit my appliance?

This product is compatible with:

  • Cookers & Hobs : You must check the dimensions match your motor

Description

Universal Oven Fan Motor

Has the fan in your oven stopped working? Is your food no longer being cooked evenly throughout? There may be a problem with the motor. Well you needn't worry anymore, eSpares has the perfect part for this problem. Here we have a genuine Hotpoint replacement fan motor, which will get your oven back to 100%. The fan will be rotating once again to ensure your food is cooked to perfection!

Specification:

  • 220 / 240 V
  • 50HZ
  • 32W
  • Diameter of motor mounting plate: 130mm
  • Depth of motor and mounting plate: 60mm
  • Length of spindle between mounting plate and fan blade: 20mm
  • Diameter of fan blade: 150mm
  • Depth of fan blade: 22mm
  • Note: not supplied with mounting screws (these may be different to your originals depending on appliance)

Please check the dimensions and the specifications match those of your original fan motor to be sure it will fit your oven. Specifications can usually be found printed on the motor.

How to replace an oven fan motor

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

Rated 4.5 out of 5 (415 customers)
Write a review
  • Universal??

    • 3.0 out of 5
    • 3.0 out of 5
    • 3.0 out of 5
    • 3.0 out of 5

    By - Cumbria

    This part for my Lamona double oven was delivered quickly, and as always there service is good from espares. However it was no easy task getting this to fit, it had to be modified considerably and also the back of the oven.
  • Half hour task on a Belling Formula XOU388

    • 5.0 out of 5
    • 3.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5

    By - Southampton

    I was a little concerned about the lack of packing around the actual item, it was merely floating in the box, but it did not appear to be damaged as a result. As previously mentioned the fan shaft was too long and required half an inch's worth of packing washers on each of the screws. Of course that made the existing screws too short, but I suppose if you are likely to do this sort of repair you are likely to be the person who has a pot of screws for just such and eventuality. You need an extension to your arms or an assistant to accomplish the fitting as you cannot reach inside the oven to screw and hold the fan in it's position at the back, especially as there are 6 or 7 washers balancing on each screw. Apart from these minor issues, quite a straight forward job and a whole lot cheaper than a new oven.
    • Response by Chris on 28 Jul 2015 eSpares Staff

      Although suitable for many machines (and adaptable for some others) we would advise to check the spindle length to avoid the problem of packing the motor. If you require a shorter spindle length we suggest you use the manufacturers original part and not a 'compatible' one.
  • Fitted straight into Smeg SUK61MFX Oven

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Hastings

    This universal fan fitted perfectly and easily as a straight replacement to the original Smeg part and brought our oven back to life. The wiring connector positons were slightly different but it didn't seem to make any difference. Great service, fast delivery - this is how all online purchases should be! Thanks eSpares!

Ask & Answer

(57 Questions and 57 Answers) Ask a question
  • Q I am unable to release the nut that holds the fan in place. 3 Answers

    I am aware that it is opposite thread but the oven has been in use for 10 years or so, is there a particular method for releasing this nut. Not sure about using WD40 in the oven as the smell would linger.

    By Anonymous - Liverpool - 03 April 2012

    • A
      I struggled with removing the fan blade from my NEFF oven. 10mm nut came off ok using socket set and just holding the blade in position with my hand, problem was then removing the additional shaped washer and the blade itself. Found that gripping the threaded end with some mole grips and them rotating the blade by hand did the trick, although I had to work at it.

      By John - Staffordshire - 18 May 2015

    • A
      It doesn't matter ,as if your changing the whole fan assembly you don't need any of the old fan,,) and wd40 is fine to use ,but clean off all parts left in oven ,

      By Tricky trev g - Southampton Eastleigh area - 06 July 2013

    • A
      I've just removed mine from my cooker thats been used every day for more than ten years. You are right to unscrew the nut by turning clock wise(this is opposite to normal).Hold the fan blade with one hand - maybe with a glove on and using a 10mm spanner undo the nut, it does not matter if you have to use excessive force or even shear the fan motor spindle as obviously you are removing the fan blade to replace the fan motor i presume.

      By Bert - Norfolk - 24 April 2012

  • Q When i turn the oven on there is a delay thats getting longer before the fan starts. Does this mean it needs replacing? 2 Answers

    By Ann - Northampton - 15 September 2011

    • A
      A Slower and slower start for the fan was symptomatic of the need for a new one. But beware - the element relies on the airflow to cool it Left un cooled it will eventually blow , as mine did , resulting in another 20 quid down the pan. Change the fan now and you might be lucky.

      By spanners - merseyside - 16 December 2011

    • A
      Sounds like you mighht have a loose conection or it on its way out. I would just wait till it packs in or open up back and check all spade conectors if it is not to much hastle for yourself

      By mikey - glasgow - 21 September 2011

  • Q Where does the fan motor heat shield go? 1 Answer

    Ive just ordered a universal fan motor the website showed a heat shield to go with it for £6.99p so I ordered but where does it go its not shown in any of your videos?

    By Baz - Teesside - 21 July 2015

    • A
      The insulation is fitted between the motor body and the cavity wall to reduce the heat conducted to the motor.

      By Chris eSpares Staff - 22 July 2015

  • Q Will this fit a belling country chef please? 1 Answer

    By M kerslake - 28 June 2015

    • A
      In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

      By Chris eSpares Staff - 29 June 2015

  • Q what weight of this item? 1 Answer

    By m.a - 05 June 2015

    • A
      The weight we would expect to be less than 1KG but if you are finding a part for family abroad you can arrange delivery direct by clicking on the blue (change) to set your country at the top centre of the page and add the part to your basket. Then when you go to ‘Your basket’ the correct cost including delivery (if possible) will be displayed.

      By Chris eSpares Staff - 05 June 2015