Sharp Wpro Microwave Lamp - T25, 25W, A Base

Stock Number: ES1028557

Manufactured by Wpro

(This part fits select Sharp models)

Usually despatched within 2 weeks About despatch times

Rated 5.0 out of 5 (24 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image


Wpro Microwave Lamp - T25, 25W, A Base
If the lamp in your microwave has blown or been damaged it may be affecting how you use it. Well, thanks to eSpares, you don't have to put up with it anymore. This genuine spare lamp is easily replaceable and will have your microwave looking like new in no time.
  • Also Known As: Lamp & Holder
  • 25 watts
  • Type: A Base
  • Code: LMO006
  • T25
  • Long Life: 2,000 hours average
Genuine spare part suitable for select models of Sharp, Bosch and many more brands of microwaves.
Please check the list of suitable models to ensure that this spare part will fit your appliance.

More product images

Product Reviews

Rated 5.0 out of 5 (24 customers)
Write a review
  • The right lamp

    • 5.0 out of 5
    • 4.0 out of 5
    • 4.0 out of 5
    • 5.0 out of 5

    By - Leeds

    The exact like for like replacement as per photo-not as per Panasonic parts number.
  • Microwave Oven Lamp

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 3.0 out of 5

    By - Newton Mearns

    Item arrived safely and quickly, well packaged in its bubble packaging. Once the casing is removed from the microwave, the old lamp can be out and the new one fitted in less than 30 seconds. Simply pull off two spade terminal connections and unclip the old lamp from its mounting. Clip the new lamp base into position and refit the electrical connections which are not polarity sensitive. Caution! Sharp in their product manual state that only a qualified engineer should fit a replacement lamp - Not so, the lamp is mounted well away from any hazardous components, obviously observe normal safety measures such as unplugging from the power source before commencing any repairs and just be careful not to poke any tools or fingers into the microwave generator or other high voltage components mounted near the back of the microwave cabinet. One final point, while searching the eSpares parts list for this replacement lamp, I could not find a lamp listed for my model R-959(SL)M-A microwave, but the photo image of this lamp appeared identical to what I needed. This particular lamp is listed as suitable for lots of other Sharp microvaves but quite specifically that it is unsuitable for my microwave. Despite this I ordered this lamp (I could have been wasting a tenner), I knew the voltage and wattage matched the blown lamp's spec, I just wasn't sure from the photo whether the new lamp and its base was physically larger of smaller than the lamp being replaced. But - Hey Presto! - Identical in every respect.
  • Microwave lamp easier than expected

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 4.0 out of 5

    By - Essex

    The manual said the Sharp microwave lamp had to be fitted by an expert. Rubbish. The outer case comes off easily, and I identified what I needed, then replaced the case. The replacement lamp came through quickly, and was identical to the old one. With the case off again, it was only a matter of pulling off two spade terminals, unclip old lamp, clip in new lamp and reconnect. Case back on and job done. Did not have to get anywhere near any of the microwave components. Excellent

Ask & Answer

Be the first to ask a question Ask a question