Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Hotpoint Tumble Dryer Pump Kit for CTD00P Stock Number: ES1024993

Hotpoint Tumble Dryer Pump Kit for CTD00P - ES1024993

5.0 out of 5 Rated 5.0 out of 5(16 customers)

Genuine spare part for select Ariston, Creda, Hotpoint, Indesit and Proline appliances

Read more

Manufactured by Indesit

(This part fits select Hotpoint models)

Will this part fit my Appliance?


This part is compatible with Hotpoint CTD00P Tumble Dryers.

Not what you're looking for?
See all parts for your appliance.

Tumble Dryer Pump Kit

If the pump for your tumble dryer is causing you problems, you should let eSpares take over. This genuine spare pump kit could be an ideal replacement that will soon have your old dryer working like new. You'll be drying your clothes at your convenience again in no time.
Genuine spare part suitable for select models of Ariston, Creda, Hotpoint, Indesit and Proline appliances.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
Write a review

Here’s what other people are saying about Hotpoint Tumble Dryer Pump Kit for CTD00P.

(16 reviews)

5.0 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 5 out of 5
  • Derbyshire
    5.0 out of 5

    Great buy

    Did the job easy to fit as we watched the videos would recommend e spares very helpful thank you

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Wharfedale
    5.0 out of 5

    Glad I came to you

    I watched the video which advised me the pump was causing the fault on my hotpoint tumble dryer . I then order the parts on line which arrived the next day The removal and installation of the new assembly was quite straight forward Just one tip before you dismantle the old unit I would give any one is to take a close up photo of the wiring and print it off so the connections go back in the right place. Thanks Espares

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Norfolk
    5.0 out of 5

    Good replacement product, but beware...

    If you need to replace an original pump, be warned that the new pump, which has superceded the original design, requires different housing which involves buying this kit as opposed to a standalone pump. Once I got this kit, the changeover process was relatively simple (for someone with no plumber/electrician experience - however, I did use the advice guide video from eSpares for guidance, which was very useful.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

4 Questions and 4 Answers

I bought this kit some while ago and just came to fit it. Unfortunately I can't see how to get the top off the old pump. I don't want to force it too much in case I break it? Is there a video for it?

By egros - Isle of Wight - 27 January 2014
  • Chris from eSpares
    Chris at eSpares says...

    The pump assembly is attached to the back of the dryer using the plastic tabs and barbs to hold these in place. To remove these (I have changed many) You can usually just carefully prise them out with a flat bladed screwdriver. If you break a tab you have a new housing cover in the kit supplied.

Answer this question

does it come with the float microswitch as well as the float ?

By Drew - Sheffield - 31 December 2013
  • Chris from eSpares
    Chris at eSpares says...

    The micro switch should be removed from the old pump and transferred as it is not supplied as part of this kit.

Answer this question
By ears - n.ireland - 04 December 2010
Answer this question
By bobf279 - - 20 June 2009
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    There is no difference except that they are manufactured to fit different models of appliance.

Answer this question