Indesit Washing Machine Drum Paddle

Price:£10.49

UK Next Day Available
About delivery

We won't be beaten on price
Price Match Guarantee

10% OFF if you buy 2 or more
£18.88 for 2 - save £2.10

Stock Number: ES186730

Manufactured by Ariston
(This part fits select Indesit models)

In Stock
Available for immediate despatch

4.6/5.0 Rated 4.6 out of 5 (176 customer ratings)

Read all reviews Write a review

enlarge image

Fits the following models [?]

Click on your brand to see the model numbers this part fits.

Description

Your washing machine's clothes lifter keeps your laundry circulating properly, ensuring that your clothes come out of the washer clean.

Base dimensions: 225 x 55mm
12 holes

This spare drum agitator is a genuine part and will fit select Ariston, Creda, Hotpoint, Indesit and New World washing machines. Please check the list of compatible appliances prior to ordering.

More product images

Easy to fit
14 May 2013
- Overall Rating 5.0/5.0
- Quality 5.0/5.0
- Value 5.0/5.0
- Ease of fitting 5.0/5.0
By HR - Scottish Borders - Fix-It Beginner

Web site easy to use. Just put in make and model no. up came the required part. Came quickly as promised and fitted in seconds. Brilliant!
03 May 2013
- Overall Rating 5.0/5.0
- Quality 5.0/5.0
- Value 5.0/5.0
- Ease of fitting 5.0/5.0
By Alan - coventry - Fix-It Beginner

Product exactly what it says it is very easy to fit and very satisfied with the product would definitely recommend x
Exact replacement
17 April 2013
- Overall Rating 5.0/5.0
- Quality 5.0/5.0
- Value 5.0/5.0
- Ease of fitting 5.0/5.0
By Matron - Surrey - Fix-It Beginner

Prompt service and delivery of product. Fitting is simple although a very firm 'push' is required to locate tabs.

Q How do I get these to fit properly? 2 Answers
I have tried fitting replacements but there is a metal piece in the centre that when upright prevents the paddles from sliding/cliping into place. If I bend this piece down and flush with the drum then the paddles slide/clip perfectly into place, however when I use the machine the paddles are not held securely and snap off (again!). I now need to order more of these but need to know how I get them to hold in place after fitting - i.e. how do I get the metal piece in position to hold them?

by Tra77 - 02 August 2010
- A
  
  I used a short length of thin string to lift the metal tab back up after fitting the paddle. Before fitting I bent the tab flush with the drum. I then looped the string around the tab (no knots) and fed the loose ends through a hole in the paddle. The paddle was pushed into place and then gripping both ends of the string I pulled the tab back up. The string was then removed by pulling one loose end.
  
  by secret mile muncher - 08 October 2010
- A
  
  We do have a help video for fitting this part but cannot advise beyond this unfortunately. If you require further assistance please contact an engineer for fitting this part. http://www.espares.co.uk/advice/washing-machines/a/7/1270/how-to-fit-a-washing-machine-drum-paddle.html
  
  by eSparesMalindi - 03 August 2010
Q All three paddles have broken off my Indesit WIL133UK at the same time. Any suggestions why this may have happened? 2 Answers
by cllyjo - 07 February 2010
- A
  
  Going to be a bit late with this answer I think but when it happened to my machine it was an Allen Key swirling about at the back of the drum that was shearing off the plastic clips that hold the paddles in place!
  
  by asheriff - 12 October 2011
- A
  
  Sorry we don't diagnose faults, only replace the spare parts. Should you need technical assistance, please speak to an engineer.
  
  by eSparesMalindi - 10 June 2010
Q I have an Indesit WD12X and one of the drum paddles just came off. Just wondered if it is easy to fit the new one and if I could get instructions? 1 Answer
by salj03 - 27 July 2010
- A
  
  My model number is different but if fitting is the same you place the paddles over the grooves in the drum then push forward or back into the narrow section of the grooves and the paddles are secure quite literally a minutes job.
  
  by tapper - 05 August 2010
Q how do i get the old paddle off 1 Answer
wf561puk washing machine paddle has a hole in it but i cant work out how it comes off to fit the new one i have just ordered, any suggestions.

by waveyd - 24 August 2009
- A
  
  It should just slide towards you. It may be a bit stuck as they are tight fitting but it will slide towards you with a bit of effort then the new one simply slides back onto the metal slots. Hope this helps.
  
  by workjagwoman - 03 November 2009
Q will this paddle work for my machine? 1 Answer
I have an Ariston AMLG 101 (Washer/dryer). Will this drum paddle fit my machine??? thanks,

by vals - 07 July 2009
- A
  
  Hi Vals, I'm afraid I can't match your model number in our washing machine or tumble dryer databases. Would it be possible to double check? For help locating it, use our guide: http://www.espares.co.uk/findingmodelnumbers.aspx#a7
  
  by Rory - 08 July 2009