Fits the following models [?]

Click on your brand to see the model numbers this part fits.

• Belling Cookers & Hobs (298)
• Hotpoint Cookers & Hobs (367)
• Jackson Cookers & Hobs (40)
• Cannon Cookers & Hobs (46)
• Indesit Cookers & Hobs (28)
• Wrighton Cookers & Hobs (4)
• Creda Cookers & Hobs (386)

Description

How to replace an oven element

This video should help with fitting this part. However, the exact layout and fitting technique may differ for your make and model.

Be safe - always unplug any appliance from the electricity supply before carrying out any work on it.
If you are in any doubt contact a qualified repairer.

More product images

Product Reviews

4.8/5.0 Rated 4.8 out of 5 (747700 customer ratings)

• Great deal and saved myself a packet by doing it myself

  16 May 2013
  • Overall Rating 5.0/5.0
  • Quality 5.0/5.0
  • Value 5.0/5.0
  • Ease of fitting 4.0/5.0

  By Rob - Manchester - Fix-It Beginner

  I watched the youtube instructions and away I went. The only thing was the spade fitting on the end of the right wire popped off the old element as I pulled the left one off. It disappeared inside the hole and it took me ages to find it and fish it back out. I was pulling out fibreglass insulation and getting quite frustrated. I changed tools and used a steel tent peg as a last resort and finally saved the day. Changing the element is actually very easy to do, just be careful not to let the wire go.

• Excellent item

  14 May 2013
  • Overall Rating 5.0/5.0
  • Quality 5.0/5.0
  • Value 5.0/5.0
  • Ease of fitting 5.0/5.0

  By bill - Fix-It Expert

  Excellent item at a very good price easy to fit easy to find on Espares excellent site

• Good Value for Money

  13 May 2013
  • Overall Rating 4.0/5.0
  • Quality 3.0/5.0
  • Value 4.0/5.0
  • Ease of fitting 4.0/5.0

  By HB66 - Surrey - Fix-It Beginner

  Found this site, ordered the part I was looking for, it was with me next day delivery. I found the site, easy to use, and the part was good value for money and the service was quick and efficient. Would differently use them again! Have now put the website on my Facebook page!

Ask & Answer

(4 Questions & 4 Answers)

• Q rcd trips when fan in oven is about to start 1 Answer

  Creda Hotpoint electric oven. Almost every time we use our oven the RCD for the cooker trips as the fan is about to start. This has happened for at least 6 months now. Element used is 2500w as above bought Dec 2010. Any asiistance on how to resolve this very welcome. thanks.

  by Steve - 09 November 2011

  • A

    If this has only been the case since you replaced the element are you sure that the wires have gone back in the correct place and are not touching the retaining screw or someother metal part of the cooker.

    by Countryman - 22 November 2011

  

• Q do you have the dimensions for ES1019719 1 Answer

  my element is from an ariston cooker 250mm across connectors 50mm apart 2500 watt exact image of above. nothing in ariston looks anything like mine.

  by sark - 25 June 2011

  • A

    The ring is about 250mm diameter. The fixing plate is just inside the element ring. The fixing plate is about 25mm x 60mm with a central fixing hole. The element passes through the fixing plate at 40mm centres.

    by Jerryd - 20 July 2011

  

• Q taking element out 1 Answer

  how do you undo the screws as i don't have a socket small enough to do it .??? the smallest socket i've seen and got is a 4mm or 5/32.i have a belling xou178 model. regards baron

  by dorg - 27 February 2010

  • A

    Well I used pliers - I know you shouldn't but needs must - I was getting hungry

    by memyselfi - 18 March 2010

  

• Q warranty on this part. 1 Answer

  whats the warranty on this product when fitted by a diy person? many thanks

  by rick1 - 07 September 2009

  • A

    UK law states all new products must have 12 month warranty unless stated otherwise in the terms and conditions. read the small print. Even then the bit that says this doesnt effect your statutory rights gives you cover against the small print.

    by Zingano1 - 03 January 2010