Dishwasher Heat Exchanger Outlet Valve Stock Number: ES1777706

Overall rating

• Steve P PE28 5XB
  5.0 out of 5

  Quick and Easy to Fit 02 October 2023

  I bought this after looking up the fault code on our Bosch dishwashing. Watched an online tutorial and saw how easy it was to replace the Heat Exchanger Outlet Valve. So after making sure e-Spares had the exact item I needed, made the order and it arrived the next working day. Followed the tutorial to the letter, as I did the replacement. Took all of 20 minutes from pulling out the dishwasher, to switching it on to test. Code gone, dishwasher working perfectly. Paying for the spare, watching the tutorial and doing the job myself, saved me about £125 for an engineer to come out and do the job.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Doug Melton Mowbray
  5.0 out of 5

  Great, trouble free service 31 July 2023

  Looked up part on the eSapres webiste, ordered it, arriving in 24hours, fitted, machine working, no hassle

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Steve Lincoln
  5.0 out of 5

  Effective E19 error repaired on Bosch dishwasher 03 July 2023

  Part came with fitting instructions included. Dishwasher worked perfectly after swapping the valve. Little bit fiddly to remove and refit the valve itself, but this was due to tight space in the machine, nothing to do with eSpares.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Steve Tring, UK
  5.0 out of 5

  Straightforward fix for E19 alarm 17 June 2023

  If you search YouTube, there are some good videos of this solenoid valve being changed. Worth a quick look. It really is a fairly easy procedure, if you are of an engineering bent. I recommend a little silicone grease on the rubber O-ring so it seats into position easily - it is fairly tight to get it past the housing - and to gain a leak-free seal. Also, taking the old solenoid valve out, sometimes the old O ring will remain in the bore of the fitting, but you must remove this too, and make sure you fit the new O ring only, not both! I noticed in the pack is a self adhesive plastic heat shield, which is presumably to prevent the coil of the new solenoid from burning out, something my old one had (coil was open circuit), although this is not really explained. Anyway, I strongly suggest you fit this, according to the drawing supplied. Power up the machine, do a RESET, and then all will be well. E19 is a heat exchanger temperature time-out alarm. Fitting a new functioning valve is almost certainly going to repair your machine.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Rich G Hampshire
  5.0 out of 5

  Does the job 12 December 2022

  Googled the fault code and this part came up. Worked like a charm. Was a little tricky to fit (leaked on first attempt, which set off flood sensor). 2nd time lucky with the help of a screwdriver to push it into place. If I can fit it, having never seen the inside of a dishwasher before, anyone can... thanks YouTube and Espares.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• H Holt Kent
  4.0 out of 5

  Outlet solenoid valve 10 April 2022

  The Espares part was a direct match for the faulty valve on the dishwasher. A bit fiddly to get the old one out and more so getting the new one in, but once done this immediately solved the problem

  Ease of fitting	3.0 out of 5
  Quality	4.0 out of 5
  Value	3.0 out of 5

• Stuart Cheshire
  5.0 out of 5

  Simple fix to DIY 27 February 2022

  This unit has now been replaced twice in four years so is classed as a consumable. Easy to change. Fast delivery from Espares keeps the marigolds at bay!

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• OM Barnstaple
  5.0 out of 5

  Fiddly to fit 05 May 2021

  Fiddly to fit but that’s down to Bosch’s design! Quick and efficient service and reasonable price

  Ease of fitting	2.0 out of 5
  Quality	5.0 out of 5
  Value	3.0 out of 5

• Pu
  5.0 out of 5

  Easy repair. 11 April 2021

  Easy repair for Bosch dishwasher fault e 19. First class service.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Richard Hoare Kings Lynn
  4.0 out of 5

  Good product.......poor packaging. 14 March 2021

  Fault code E19 on a Neff dishwasher. The item when fitted cleared the E19 fault code But it is not the easiest of parts to replace. The packaging when delivered was split and the connector was protruding through the split in the thin cardboard envelope. Product 10 out of 10 .....Packaging 2 out of 10.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5