Oven Lamp Cover Remover Tool - 63mm Stock Number: ES1123507

Overall rating

• Nigel bristol
  3.0 out of 5

  Removes most lamp lens.... 16 June 2013

  I purchased this thinking it would remove all Neff/Bosch lens. However it doesn't and there doesn't seem to be an alternative for larger sized lens.

  Quality	5.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	4.0 out of 5

• pete scotland
  3.0 out of 5

  good purchase 30 July 2012

  Just received the lamp cover remover tool. As most complaints the tool was slipping around the cover, the best tip i can give is to purchase a hose clamp approx 75mm diam and place it at top of the tool, tighten the hose clamp slightly before fitting on cover,try and find flat metal bar approx 5mm thick and approx 250mm long to assist with removing the cover, it will then remove the tight cover no problem.

  Quality	3.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	5.0 out of 5

• Anonymous Nottingham
  3.0 out of 5

  Lamp Cover Remover Tool 02 April 2012

  It is perhaps unfair to donwgrade this Lamp Cover Removal Tool. It was easy to handle and gripped the lamp cover firmly. However, even with the extra leverage it did not remove the cover using hand pressure. I could have applied extra leverage, I suppose, but unless you are experienced in this task you do not know how far yuou can go before smashing the glass or distorting the glass holder. I wonder whether the best thing is to loosen it once a week from new to prevent cooking residues baking it in.

  Quality	3.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	1.0 out of 5

• JJ
  3.0 out of 5

  Not perfect but impossible without it 29 February 2012

  This plastic tool slips off the glass lamp cover very easily when you try to rotate it. Only worked when I pulled oven out and turned it on its back so i could exert enough pressure on the tool AND rotate it. However I couldn't have done it without the tool.

  Quality	3.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	3.0 out of 5

• Anonymous Solihull
  3.0 out of 5

  Back to basics 17 February 2012

  Disappointed the bulb cover needed a tool to remove as only had the oven a few months. Contrary to the Bosch instructions turn the right way and it works. A bit flimsy and slides off if too much force required.

  Quality	3.0 out of 5
  Value	2.0 out of 5
  Ease of fitting	3.0 out of 5

• noname Wales
  3.0 out of 5

  It worked 06 January 2012

  I am not sure why Bosch designed an oven lamp cover that cannot simply be unscrewed by hand (by the non specialist anyway) but they did. I am also not sure why I should have to pay for their poor design by having to buy this simple device. But it does work. The cover came off quite easily and fitted back even more easily.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	5.0 out of 5

• Anonymous ipswich
  3.0 out of 5

  Neff Oven Light 21 October 2011

  I am sure your product is fine normally but we ended up having to get a Neff engineer out to remove the glass. Neff have redesigned the glass cover with a metal washer between the glass and the oven so hopefully your device will work OK when we next need to change the bulb.

  Quality	3.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	3.0 out of 5

• kp11 North Midlands
  3.0 out of 5

  Ease of use 26 July 2010

  This was helpful in removing the lamp cover but still needed a strong man to operate.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	4.0 out of 5

Ratings-Only Reviews