Cooker Thermal Cut-in Type 261 T220K 10(3)/250 45°c Stock Number: ES605941
Genuine spare part for select AEG and Electrolux cookers
I have a Zanussi ZDQ995X when the oven is on ie heating up the control panel switches off & on & shows F8 on the display, do you have any suggest as to the cause. 1 Answer
-
Christopher at eSpares says...
The error F8 indicates the display or control board is not 'communicating' with the power module. This could be a problem caused by either board or the connection between.
This oven seems to be running too hot & burning food. Also if it needs replacing, where do I find it on my oven unit ? regards Martin
-
Chris at eSpares says...
The part you listed is the fan thermostat, this keeps the cooling fan running when hot. The error F5 is saying a relay that controls the element is stuck and is not allowing it to switch off when up to temperature. The cure for this is to replace the module Stock Number: ES1024480, unfortunately this is discontinued by the supplier and we have no stock.
What symptoms can I expect if the thermal cut-in switch was defective? Could this produce these fluctuating temperatures? The main oven thermostat switch seems to click in & out as normal but the temperatures in the main fan oven vary by anything from 20 to 25 degrees different from the indicated temperatures on the control switch. Might it be something else entirely?
Will this part fit my appliance?
Check Now