Over 4 million customers served
Part assist UK call centre
Universal Oven Door 3-Sided Seal Kit - 1.5m Stock Number: ES486644
Universal spare part suitable for most ovens
Will this part fit my Appliance?
This product is compatible with:
- Cookers & Hobs - That Match The Criteria In The Description (See The Video Too)
Universal Oven Door 3-Sided Seal Kit - 1.5m
This universal door seal is designed to fit most modern ovens that have a three-sided seal. The seal attaches to the body of the oven by a single hook in each corner.
Please make sure that there is a single hole in each corner of your oven. This will not fit ovens that have two holes in each corner.
The kit includes a 1.5m length of black door seal that you cut to the right size for your oven, plus 2 corner and 2 straight hooks to attach the seal to the body. Comes with full fitting instructions.
PLEASE NOTE: Not suitable for ovens with curved corners or more than one hole in each corner.
To fit the new seal:
- Measure the distance between the holes
- Cut the top and sides of the seal to size
- Trim the joints to 45°, leave the bottom end of the side seal at 90°
- Insert the barbed corner hooks into the slot of the seal at the top corners
- Insert the barbed straight hook into the slot of the seal at the bottom of the sides
- Clip the corner hooks into the top holes and the straight hooks into the bottom holes on the face of the oven
Specification:
- Colour: Black
- Silicon
- Length: 1.5m
- Depth: 10mm
- Includes 2 corner brackets and end clips
Where possible we would recommend that you order a branded/genuine door seal for your cooker. To find out if we carry the door seal for your oven please enter your oven model number in the search box above.
-
Norfolk
-
Dorset
-
Ask a Question
9 Questions and 10 Answers
- Sounds like your oven cooling fan is not working
-
Rory at eSpares says...
Hi andy1976, it sounds as if heat is escaping from the top oven, causing the control knobs to melt. A damaged door seal is the most common reason for this happening. Check out the video on this page for help fitting the door seal.
What is "goal post design"? 1 Answer
-
Chris at eSpares says...
'Goal post' refers to a 'top bar' with vertical 'posts' so creating a square shape with the lower edge missing.
The existing lower oven is around 33 years old and is goalpost design with rounded corners attached with clips?
-
Chris at eSpares says...
The clips supplied with this kit will give 'square' corners but it should be possible to use this kit.
there would be quite a gap between the hooks and the original seal was stuck down as well as hooked. My cooker is a Leisure Bistro 55 ng 5767.
-
Chris at eSpares says...
The seal should not be stuck down just held taught by trimming a little shorter than the actual length and stretching into position.
is hotpoint a three sided door seal 1 Answer
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Perfect replacement 03 October 2020
This oven door seal was so easy to fit and was a perfect replacement for the original. Oven now retains heat better and works more efficiently.