Universal 4 Sided Oven Door Seal (For Rounded Corners) Stock Number: ES1712443
Universal oven door seal for select cookers with rounded corners
Will this part fit my Appliance?
This product is compatible with:
- Cookers & Hobs - That Match The Criteria In The Description below
Universal 4 Sided Oven Door Seal (For Rounded Corners)
Have you found that hot air is escaping from the door of your oven? It sounds like you have a faulty door seal. If the seal is faulty you could find that your food is not being cooked correctly, and that the control panel and its control knobs are being melted and damaged. eSpares has this replacement compatible door seal that can easily be fitted to your oven, to help solve the problems you are having - and get you back to being able to create tasty dishes at meal time again in no time!
This universal door seal is designed to fit most modern ovens that have a four sided seal with round corners. It will effectively replace seals with curved corners. The seal attaches to the body of the oven by a single hook in each corner.
Please make sure that there is a single hole in each corner of your oven. This will not fit ovens that have two holes in each corner.
PLEASE NOTE: Suitable to fit most ovens with four sided seals, rounded corners and one hole in each corner.
For oven seals with square corners see ES131929
-
Measure the distance between the holes
-
Cut the top, bottom and sides of the seal to size
-
Trim the ends to remove any gaps
-
Insert the barbed corner hooks into the slot of the seal
-
Clip the corner hooks into the holes on the face of the oven
- Colour: Black
- Silicon
- Length: 2m
- Width: 10mm
- Includes corner brackets
- Please measure the perimeter of your current seal to ensure it is 2 metres or Smaller
-
Gloucestershire
-
Dudley
-
13 Questions and 13 Answers
-
eSpares Staff at eSpares says...
This seal goes into the oven cavity and the door closes against it to stop hot air escaping.
-
eSpares Staff at eSpares says...
There is a guide on our website and a video attached to help you fit this product, make sure it is suitable for your model before ordering.
-
Parminder at eSpares says...
Please make sure the hook on the metal door connector is facing down with the door seal facing ridge side up. For further information please see our advice centre article: www.espares.co.uk/advice/careandmaintenance/how-to-fix-a-universal-oven-door-seal-round-cornered
-
eSpares Staff at eSpares says...
The flat side of the seal goes against the cabinet, there is a video to show you how to fit the seal correctly www.youtube.com/watch?v=PENHDnnS8kY just copy and paste into your browser.
Is the seal flat 1 Answer
Fitting Instructions unhelpful 14 June 2020
The sheet of paper included with this product was not very helpful, and it was only when I returned to the eSpares website and watched their instruction video did I discover how these seals should be fitted. I think either the leaflet that comes with the product should be more explicit as to the way these items are fitted, or there should be a clear direction to the eSpares video. I got them on eventually, but not without some concern that I may have needed to order a replacement set due to the risk of destroying the first ones!