Qhow do you install the bulbs inside a neff oven? the glass has no screw and isnt just popping off.6 Answers
- 26 September 2009
See Stock Number: ES1123508 as check the reviews of this product as it makes a great difference.
- 14 August 2014
Use this device its great, it is so easy you will wonder why it didn't come with oven;
Neff Lamp Cover Remover Tool
it can be bought from this site, this is the link
- 16 April 2013
Put your Marigolds on and persist!
By Clickety Mick- Poole
- 13 January 2011
We've had a lot of feedback on this issue and have since introduced a light cover removal tool. This should make the job a lot easier, see it here.
By Michael- eSpares Towers
- 26 January 2010
I guess this depends on the oven model. I recently replaced the bulb in our main (Neff) oven. The glass cover unscrewed though it was a little tight to shift at first. The bulb is also a screw fitting and is quite recessed in its housing. It's just possible to get enough grip on the glass to unscrew it. The whole task took a couple of minutes to complete. No tools required.
By MrBodgeit- Chester
- 01 November 2009
If located at the top rear right hand side you should be able to unscrew the lamp cover by turning it anti-clockwise. To prevent damage place a towel into the oven bottom. These can be really stubborn - if no good with the oven cold, try warming it up to say 70 degrees C and allow it to cool a little and while still warm try removing again. Neff's call centre suggest vinegar to help loosen it.
Qhow long does a bulb last in a halogen oven2 Answers
By Beryl- Liverpool
- 06 March 2009
in our Neff oven, between 3 and 6 months. The first time the bulb went I thought it must have been a faulty bulb, but we've got through 4 bulbs in the past year. I always buy them at least two at a time now.
By nick- camberley
- 28 December 2012
They seem to last about two years
thats when i last change one.
Qmy belling dose not have a cover is this ok1 Answer
removed old lamp do not remember a lamp cover
By Anonymous- de13 9ql
- 12 November 2014
The cover should be replaces as fat, grease and cleaning compounds may get into the connections and cause the holder to fail. The cover is not likely to be available on its own but if you order the complete lamp you may be able to just transfer the cover on to the oven.
QI need to replace the bulb from my Siemens oven. The details on the bulb i have removed are as follows: Philips 40w 240v 300C EQ and then a "G7". Can you please confirm which bulb i need to order from you? Many thanks1 Answer
By Anonymous- Glasgow
- 10 August 2014
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.