Indesit Tumble Dryer Poly-Vee Drive Belt 1860 H9 - 1860H9 PHE Stock Number: ES865678

Overall rating

• g matthews southampton
  3.0 out of 5

  what a game this is 20 February 2018

  What a game this is, this belt only just fits over the drum and yet you have it strech it to reach the motor pully by atleast 3 inchs. This was not easy to fit and i still can not understand why they don,t have a larger belt and a tenchion pully. Hope i never have to fit this again. But i will say this if it was not for espares i would have had to buy a new machine well done espares.

  Ease of fitting	1.0 out of 5
  Quality	5.0 out of 5
  Value	4.0 out of 5

• D McD N Ireland
  3.0 out of 5

  good quality but teribble fit 05 June 2017

  This is the same brand that was in the machine so quality is excellent, but you would need Popeye to fit it. I checked it against old belt and it is an inch shorter . The only way I could get it on was put it on the motor first then use screw drivers like putting a tyre on a bike wheel. I am a mechanic by trade and this is just a nightmare to fit. if they made the belt even an half inch longer it would help

  Ease of fitting	1.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Brad40 Essex
  3.0 out of 5

  Not the best 05 January 2014

  Got this for my indersit tumble dryer, very difficult to fit maybe that was down to indersit design just not enough give to stretch it over the pulley ended up having to use a 2ft wrecking bar just to get it to fit.

  Ease of fitting	1.0 out of 5
  Quality	3.0 out of 5
  Value	3.0 out of 5

• sunshine
  3.0 out of 5

  Good Kit 03 March 2013

  Very difficult to fit, there is a tool to help but unless you are using it on a regular basis it would not be worth buying as it is three times the cost of the belt making the repair not cost effective.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	1.0 out of 5

• Anonymous UK
  3.0 out of 5

  Great value but hard to fit 12 April 2012

  There is a video clip on the site showing how to fit the belt, but in practice it was extremeley difficult to stretch it around the drum and motor drive shaft. With the benefit of hindsight (and as a tip for future users) try putting the new belt in very hot water. This will allow you to strech it a bit whilst you install it

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	1.0 out of 5

• Linear Projects Birmingham
  3.0 out of 5

  Tumble drier drive belt 26 February 2012

  Took quite a long time to arrive, saved the tumble drier but it required a fair bit of effort to fit. Overall a worthwhile purchase, just wish I had stripped the tumble drier first as I found the front drum bearings had worn as well, just ordered new ones from espares.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	2.0 out of 5

• DIYNOT Fife Scotland
  3.0 out of 5

  Hotpoint tumble dryer belt 07 October 2010

  Great cheap product but what a nightmare to replace! Must be an easier way of changing a simple belt. Suggest you call in an expert!!!

  Quality	5.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	1.0 out of 5

• mandarin1 argyll
  3.0 out of 5

  dryer v belt 03 March 2010

  could not use,impossible to instal,base of machine and motor shaft was bending before the belt was any where near to fitting,used old belt instead.

  Quality	4.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	1.0 out of 5

• yankeedoodle London
  3.0 out of 5

  not so stretchy 28 April 2009

  The belt was fine except that it is incredibly hard to ft given that it must be stretched out a lot and there is very little give in the material - it was very difficult and required a fair bit of brute strength - not very user friendly.

  Quality	4.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	1.0 out of 5

Ratings-Only Reviews