Creda Single Pole Grill Cut Out Microswitch for 49712 Stock Number: ES836014

Overall rating

• Frank... Slough
  4.0 out of 5

  Espares were great in finding the part 21 June 2011

  When you require spares for an older appliance it is hard to find a supplier as good as Espares, very helpful in every way, delivery was a little slow but everything worked out ok, thanks again.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	4.0 out of 5

• JohnGG Windlesham
  4.0 out of 5

  Good Product 22 January 2011

  Fairly easy to fit,appears to have solved the problem of mains tripping when door is opened. Pity Royal Mail are so slow with the deliveries.

  Quality	5.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	3.0 out of 5

• Rowmcc1977 Glasgow
  5.0 out of 5

  Single pole oven door microswitch 09 August 2010

  This appears to be the bit on my Creda oven that dies most frequently. I've purchased 2 spares now (over a 6 year period) and have been pleased by the quality of the part and the simplicity of fitting. I'm not a sparky and had no problems at all fitting this. Spend £15 here and avoid pointless fitting costs / over priced parts from your high street spark. Thank you, e Spares.

  Quality	5.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	5.0 out of 5

• mfm26gry Cork
  5.0 out of 5

  excellent 04 March 2010

  Very easy to fit. The part was better made and better quality than the original part.

  Quality	5.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	5.0 out of 5

• Machine Lowestoft
  5.0 out of 5

  Micro S/W fitting 05 February 2010

  First SWITCH OFF THE POWER This should be an easy task,but beware! Pull the cooker out from it's cabinet enough to get to the access plate for the micro switch, remove the 2 holding screws from the micro switch. Remove the elongated black blanking plug from the front of the cooker frame, just above the switch because this obstructs the top L/H corner of the switch, this is where it can get difficult if the cables are loose it should be ok, remove the plugs from the switch, plug onto the new S/W refit the S/W. If the cables are tight this point you may short out the cables on a very sharp cable clip. From then on it's cooker out remove back & side cover remove the cable clip repair the damage and reassemble

  Quality	5.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	2.0 out of 5

Ratings-Only Reviews