Indesit Tumble Dryer Drum Shaft Kit (V4) Stock Number: ES546701

Overall rating

• DJC
  4.0 out of 5

  OK fit 17 April 2022

  Good service/delivery. Shaft was 5/16" diameter & not 8mm. Therefore not worth changing shaft as wear not as low as 5/16". Otherwise easy to fit and cured noisy running.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• Robert Stephenson York
  5.0 out of 5

  Great buy 16 December 2019

  After looking at a few options I decided to use espares ordered at dinner time and received it by the dinner time next day part fitted perfectly. I would recommend if your a diyer use there videos to help you my old dryer runs and sounds as a new one thank you so much for your wonderful service

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Peter Gallienne Guernsey, Channel Islands
  5.0 out of 5

  Resurrected a machine destined for scrap 26 April 2018

  This kit, purchased with a set of front and rear felt seals and the plastic front bearings - basically all the frictional parts have completely rebuilt the machine for a fraction of the price of a new tumble drier. I ordered the parts on Thursday evening and the machine was up and running perfectly by the Monday evening.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Steve Dorset
  5.0 out of 5

  Great buy, exactly as described and what was needed 30 October 2017

  fairly simple to fit although all advise will tell you need to remove the drum and door ect. but I managed to replace this part without all that you just need a bit of patience and I only had to remove the sides and it was done in half an hour. now running like a new one again, silent and smooth. My old tumble dryer is a bit like Triggers old broom thanks to espares, so well done espares once again

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• J.Britton Plumbers leeds
  5.0 out of 5

  just as described 16 October 2017

  easy to fit thanks to the video, would advise any body to watch the video so you know what to expect.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Matreya Kent
  5.0 out of 5

  much better than cheap versions 31 August 2017

  I purchased 2 much cheaper versions of these parts, they were awful and broke straight away, so I lost a lot of time reassembling and dissembling the machine that I could have avoided this by purchasing this kit in the first place.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	4.0 out of 5

• PT Pickering
  5.0 out of 5

  Exactly right for the job 13 July 2017

  Good product, job made easier with the online video

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Grazza K Yorkshire
  4.0 out of 5

  Good parts - but check your drum 06 July 2017

  Check to see whether or not you actually need the full kit. I ordered this after watching the video on changing the bearings but I wish I had looked more closely at the existing drum in the dryer because when I actually took the dryer apart, the bearing shaft was welded on, not screwed. So I couldn't change the bearing shaft. Nonetheless, the rest of the kit was excellent and allowed me to fix the problem, but I'd have just bought an S-pin and a bearing teardrop if I'd been a bit more on the ball about the existing drum! Separate parts are also available on eSpares, as are replacement drums.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• SJE Somerset
  5.0 out of 5

  just what was needed 10 May 2017

  thanks to espares' usual great videos we saved either calling out an expensive engineer or buying a new dryer. Your info said this would not fit the model of machine but having stripped down the dryer I was confident it would be okay (3 screws and a square nut clearly visible). Job done and I emailed to tell you that this does fit our Indesit IS31VUK & you even acknowledged the email so others will get the info. Thank you espares, I always recommend you.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• TFS Bristol
  5.0 out of 5

  A good buy 24 March 2017

  I thought I was going to have to scrap my tumble dryer, then found espares site, they have a very large range of spare parts for just about any appliance, fitting instructions were easy to follow and I had the job done quickly.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

Ratings-Only Reviews