Karcher Pressure Washer Outlet Connection Cover Stock Number: ES538457

Overall rating

• BB Somerset, UK
  4.0 out of 5

  pressured 18 April 2020

  Product appears to fit and work as expected. Currently only had time to conduct very brief test, therefore full review and judgement reserved until pressure washer subjected to full use. 4* currently provided as e-Spares site, although stating this replacement part is correct for Karcher Pressure Washer (Model K 3.80) subsequently stated this part; although this part appears (style, size etc.) to be exact replica was not suitable for the appliance serial number.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• R H D West London
  4.0 out of 5

  Replacement parts for Karcher Pressure washer 19 July 2018

  Product appeared to be correct replacement, however considerable difficulty experienced when refitting the ‘U’ shaped clip as it was too tightly fitting in the groove of the replacement. The clip slid easily into the groove on the original part but the new part needs to made with a wider groove so it can be fitted with thumb pressure as shown in the video provided byespares

  Ease of fitting	3.0 out of 5
  Quality	3.0 out of 5
  Value	3.0 out of 5

• Philip Cheshire
  4.0 out of 5

  Like for Like Unit Did the Trick 29 November 2015

  It was necessary to unscrew and open up the washer casing to identify the problem - split outlet connection. The espares pictorial catalogue was detailed and easy to use. The item was an original part and bore the same number as the old unit. Ensure, when removing the old connection cover that you safely retain the tiny, rubber washer seal. Failure to do so will incur additional cost and the washer will leak and not function. Removal and replacement of the actual connection cover unit was simple - in the end!

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• B A Purser Birmingham
  4.0 out of 5

  Value for Money 31 March 2015

  I ordered this item got it promptly and it has done the job!!!

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• not applicable Leicester
  4.0 out of 5

  First class service 16 July 2014

  Your contact was most helpful, understood what I required, delivery was on time. Thanks.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Harj Nottingham
  4.0 out of 5

  Value for money 21 February 2013

  Quite easy to fit and not expensive, but my washer is only 14 months old. Did not expect to change this part this early in its life. Service from espares was wonderful

  Quality	3.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	4.0 out of 5

• Anonymous
  4.0 out of 5

  did what it said on the tin 17 July 2012

  excellent price did what it was suposed to do fitted ok

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	4.0 out of 5

• Anonymous Oxford
  4.0 out of 5

  Easy once you get at it 04 July 2012

  The first time I used the pressure washer after last winter, water spraying everywhere! The hardest part is getting at the guts of the pressure washer. Online videos just skip over this and it's not that obvious how the casing comes apart. Once you've sussed it though it's dead easy. Could see straight away that water was spraying from this component. Removal was easy. Replacement ordered and I also ordered the internal O ring which was expensive compared to the cost if this item. Delivery was pretty quick and - in the event - the old O ring sealed fine. Replacement took about 5 minutes and solved the problem. No leaks! Reassembly of casing again the hardest part.

  Quality	4.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	4.0 out of 5

• Anonymous england
  4.0 out of 5

  fitting product 04 July 2012

  This is the secod part I have had to fit, The DIYer may have difficulty in removing the outer casing; my solution , bin the casing and make a smaller one that now fits a=on a shelf.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	3.0 out of 5

• sunnychap Salisbury
  4.0 out of 5

  best price 19 December 2011

  I needed to fit two O rings to prevent the fitting leaking at the joint with the motor outlet

  Quality	4.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	4.0 out of 5

Ratings-Only Reviews