Karcher Pressure Washer Outlet Connection Cover Stock Number: ES538457

Overall rating

• Zoony Nr Bristol
  5.0 out of 5

  Easy If You Have The Tools 15 March 2016

  The replacement of this item is simple, just pill the silver tab out and pull off. Getting to this item will require a long reach star drive bit and at least 3 drill screwdriver adapters, to get the reach. There are 2 screws to take off the handle, then slide to rear, 2 to take the top cover off these are posy drives. Remove additive tank by just pulling firmly away from body. Then it's just the 8 star drives to remove and then the cover comes away.

  Ease of fitting	3.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Ralph Wilson Gleaston, Cumbria.
  5.0 out of 5

  Saved throwing away the pressure washer. 03 March 2016

  The information given on the site pointed me to the right spare part, it was easy to fit and saved me buying a new pressure washer.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• John SW Wakefield
  5.0 out of 5

  Leaky Karcher K2 03 March 2016

  Great value and perfect fit. Really easy to fit. Highly recommended

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Mr M Pass Oldham
  5.0 out of 5

  Karcher outlet repair 22 February 2016

  Bought this part to fix my Karcher K3 91 pressure washer. The part was exactly right and was really easy to fit. Just needed to pull out the metal clip, pull off the split pipe and replace with the new one. Very easy to do and my pressure washer was back in action in minutes.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Alan Spalding
  5.0 out of 5

  Great! 19 January 2016

  Genuine original spare part. Fitted as easy as pie.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Philip Cheshire
  4.0 out of 5

  Like for Like Unit Did the Trick 29 November 2015

  It was necessary to unscrew and open up the washer casing to identify the problem - split outlet connection. The espares pictorial catalogue was detailed and easy to use. The item was an original part and bore the same number as the old unit. Ensure, when removing the old connection cover that you safely retain the tiny, rubber washer seal. Failure to do so will incur additional cost and the washer will leak and not function. Removal and replacement of the actual connection cover unit was simple - in the end!

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• SW Scotland
  5.0 out of 5

  great service 08 November 2015

  part exactly as described, low post and packing rates

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• DB Inverness
  5.0 out of 5

  Karcher repair 05 November 2015

  Easy to fit and did its job perfectly, much easier and cheaper than sending unit to Karcher for repair.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• AK Totnes Devon
  5.0 out of 5

  A satisfied customer 30 October 2015

  It was simple to locate and order the required item and it was also delivered quicker then expected!

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• JD Anglesey
  2.0 out of 5

  Useless 08 September 2015

  Asked ahead of purchase if this would fit my Karcher pressure washer K2 and assured it would. Turns up and it didn't, no good useless part. Thanks E-spares for no help!

  Ease of fitting	1.0 out of 5
  Quality	1.0 out of 5
  Value	1.0 out of 5

Ratings-Only Reviews