Electrolux Circular Fan Oven Element - 2500W Stock Number: ES507407

Overall rating

• Gaz C
  4.0 out of 5

  Good product 01 December 2017

  Fitted one of these 3 years ago hoping this one lasts as long easy to replace But make sure you turn off all power before fitting and double check , Downside I had to clean the oven as well never mind.

  Ease of fitting	4.0 out of 5
  Quality	3.0 out of 5
  Value	3.0 out of 5

• JJM London, UK
  4.0 out of 5

  This is a replacement element 13 June 2016

  The oven element was replaced in July 2015, and failed after 10 months. I just this replacement element is better. Can not rate product any higher because of low confidence in product

  Ease of fitting	4.0 out of 5
  Quality	2.0 out of 5
  Value	1.0 out of 5

• Graham J North West
  4.0 out of 5

  Replacement Oven Element 11 September 2015

  The video showing the process made this a simple task taking 15 minutes, and the New Element worked fine, so we're now cookin' again.

  Ease of fitting	5.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• ALC Somerset
  4.0 out of 5

  Element for fan oven 06 May 2015

  Purchased mid afternoon and received promptly the next day (for additional next day delivery). Product had suffered minor damage (bent connector) but managed to straighten. Difficulty in getting screws out from old element but apart from that the item was easy to fit and brought my oven back to life. Very pleased.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• David B Cambridge
  4.0 out of 5

  Fan oven element replaced in minutes 05 May 2015

  Thanks to the helpful video on your website, speedy delivery and good value product, my oven is up and running again. Fitting was very straightforward - I would have done the job in 15 minutes flat had I not had to move the element securing clip about 5mm to fit the existing screw hole in the oven back plate.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Brian Cumbria
  4.0 out of 5

  Great value 04 March 2015

  The element was easy to fit although you need to be careful to make sure that the screws tighten just enough. If you tighten too much you can destroy the thread in the panel and it will come loose in operation. You might want to use slightly larger diameter self tapping screws to replace it to avoid this problem.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• walkman
  4.0 out of 5

  Elementary doctor watson .. 28 January 2015

  Straightforward fit with a little help from video clips on the site. Took about 10 mins. One tip .. don't forget your torch ..

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• JB Belfast
  4.0 out of 5

  Simple Fit 26 January 2015

  Once the back cover was off the oven, this product was a breeze to fit - 2 clips, 3 screws. The harder part was replacing the back cover - I recommend a magnetic screwdriver and re-fitting the oven door. If only these 2 steps were as simple as fitting the element it would have all been done in under 10 mins.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	3.0 out of 5

• Elemental Durham
  4.0 out of 5

  Easy to source spare 25 January 2015

  Replacement compatible elements fail again after 1 year. This time I ordered the slightly dearer genuine manufacture model.

  Ease of fitting	4.0 out of 5
  Quality	3.0 out of 5
  Value	5.0 out of 5

• Woozlebear Buckinghamshire
  4.0 out of 5

  Got me cooking again 04 December 2014

  A good product which was fairly straightforward to fit once I had managed to straighten out the bent electrical connection spades. The spades were bent and prevented me from slotting them through the back of the cooker. Luckily they did not snap off. Took a risk in bending them into line but they were fixed well to the element and was able to correct the fault with no additional problem. Now have a lovely hot oven again

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

Ratings-Only Reviews