Hoover Tumble Dryer Relay/PCB (Printed Circuit Board) for TV630 001 Stock Number: ES209751
Genuine spare part for select models of Candy, Hoover and Maytag tumble dryers
Overall rating
| 5 stars: | 5 stars: | (3) |
|---|
|
5.0 stars
Rated 5.0 out of 5 by 3 customers |
Product Reviews
Write a review-
DD Milton Keynes
-
DJP Newport, South Wales5.0 out of 5
Excellent product, does the job 28 October 2016
Good quality genuine replacement part. Not that easy to fit due to the difficult position of original board. Decided to unplug the old board and reconnect the new board and install in a different location leaving the original in place. The tumble drier was up and running within 30 minutes. Thanks.
Ease of fitting 4.0 out of 5 Quality 4.0 out of 5 Value 4.0 out of 5 -
Geoff Morris5.0 out of 5
I saved a great deal of money! 18 June 2015
Our Hoover tumble dryer would not stay switched on, I sent a brief msg to espares and within the hour I had an answer and solution to fix my dryer! It was suggested that the Tumble Dryer Relay/PCB Printed Circuit Board had failed, ordered the part and within 24 hrs the part was delivered. I followed the instructions video on spares website on how to fit the part and within 1/2 an hour our dryer was up and running again! Brilliant service! I would recommend espares to anyone!
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5 -
Jems Birmingham5.0 out of 5
Really pleased 06 April 2014
The part was a good price and good quality. Easily identified the problem using this website, bought the part and a week later managed to change the circuit board in 20 minutes, saved myself a lot of stress. The how to video on the website was also really helpful and gave me the confidence to do this myself.
Ease of fitting 4.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
DJS Monmouthshire5.0 out of 5
Dryer On Button Won't Hold On? 01 February 2014
Our Hoover Dryer TC650 001 wouldn't stay on: the dryer worked if the On button was held in but stopped as soon as it was released. I tried replacing the On button but that didn't solve the problem. Then I spotted the advice on eSpares, replaced the Relay/PCB and the dryer is back to normal. Advice: if you get these symptoms, try replacing the Relay/PCB first. It's about a 20 minute job involving removing the top and front of the dryer. Start by unplugging the machine, then remove the screws at the back of the top and slide it out. The front is removed by undoing the two screws at the bottom of the panel (a little awkward), then the screws inside the door around the mouth of the dryer, then the four screws along the top. Ease the front away and unscrew the two screws holding the PCB, which is on the right next to the timer. Swap the connections from the old PCB to the new one at a time. Then screw the new PCB back into the machine. Reassemble in reverse order and test the machine.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Steviespark Northern Ireland5.0 out of 5
Hoover tumble dryer relay 19 November 2013
All started with buzzing noise from behind the timer knob when I tyred to start the dryer, and the cycle wouldn't start. The occasional thump beside the timer knob would sort it but not very professional. The new relay was easy to fit just ment removing the entire front panel section, dryer hadn't been serviced in about a year so a good vacuuming of the inside was welcomed, took around 30 mins for a novice to complete, time we'll spent no more nagging for the other half, good luck
Ease of fitting 4.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5 -
marty5.0 out of 5
candy nova tumble dryer 15 November 2013
tumble drier would run when start button was held in and stopped on release of button. Fitting this board cured the fault , only difficulty was getting to board mounting screws front of machine had to be removed. Fitted replacement board to opposite side of flange in machine with screwheads showing to inside of machine to allow easier change if needed again by simply removing lid. Fit board by swapping spade connections one by one
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Dub-nut Derbyshire5.0 out of 5
Brilliant service 31 October 2013
Brilliant service great price easy to replace would use again and also recommend to others
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Mitch Fife, Scotland5.0 out of 5
Excellent replacement Unit 14 October 2013
While the access to the existing PCB was a bit awkward, the disconnecting, removal and reconnecting was very easy. When everything was back together again the machine worked perfectly. A very good cost effective unit. The web site comments by other users was very helpful in diagnosing the correct item to buy.
Ease of fitting 3.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Anonymous wiltshire5.0 out of 5
Like for like 21 August 2013
Bought this to repair my sister's tumble drier, a Hoover HDV6. The new item looked exactly the same as the one being replaced. Fitted in minutes, problem solved.
Quality 5.0 out of 5 Value 5.0 out of 5 Ease of fitting 5.0 out of 5
Ratings-Only Reviews
| Overall Rating | 4.7 stars | 4.7 |
|---|---|---|
| Ease of fitting | 4.0 stars | 4.0 |
| Quality | 4.0 stars | 4.0 |
| Value | 4.0 stars | 4.0 |
Based on the average of 11 ratings-only reviews
Order within 13h 07m 23s to be delivered Monday!
Order within 13hrs 07mins 23sec to be delivered Monday! (Choose UK Next Working Day Delivery)
Order within 13hrs 07mins 23sec for UK Next Working Day Delivery
Will this part fit my appliance?
Check Now- In Stock Available for immediate despatch
- UK Next Working Day Delivery Available About delivery
- We won't be beaten on price Price match guarantee
Did the job ... 16 October 2017
Easy to identify as part needed .... paid for next day delivery and arrived next day