Sub total: £0.00
Call 0844 9777 888
(7p per min + any network access charge)
Universal mains cable suitable for most vacuum cleaners matching the specifications
Rated 4.8 out of 5 by 35 customers
Our old Henri (other vacuum cleaners are available) gave up the ghost. Finding no continuity on either lead over the 12m length, this was the cheapest and easiest option. Once here, 10 minutes to fit, and another successful repair.
Bought this to replace a Sebo X1 cable that had split. A bit bigger diameter cable than the original but a lot cheaper than the OEM part and perfectly adequate.
Found this lead and plug to be of better quality than the original lead on the cleaner
The outer insulation is thicker which will give a longer life than the original lead
And with the flex ends exposed and crimped made fitting the lead really simple and took me under a hour to fit 3 leads to 3 cleaners in under a hour and PA tested
It’s a good cable I got it to replace the cable in a Henry. It wouldn’t be as flexible as the original and being longer and slightly larger in diameter is quite a bit heavier than the original. The molded plug is very good quality.
Prompt service easy to fit.
Will use again.
It's just a lead i tell them!
it doesn't dance and doe's not sing
it's just a cable and and a plug
it's not as able as a slug,
a slug that's trained to dance that is,
or maybe sing a little song;
Its just a cable, just a lead
it does the job
which is all i need.
High quality replacement product easy to fit and sturdier the the original lead supplied by manufacturer
Arrived when expected . Watched the video . fitted new cable within minutes. No Problems. What more can one ask?
good quality cable, value for the money,i will certainly buy from espares should the need arrise
This cord is fine, does exactly what it says it will. The trick is fitting it... every vacuum cleaner is different and instructions for fitting are difficult to find. Before ordering the cable, I took the vacuum apart to assess how difficult it would be to fit... it turned out to be very difficult, but I figured out a way to splice it inside the case, to keep the splice still and not subject to pulling when the vacuum is used. I'd strongly advise anyone who needs one of these to check how to fit it before ordering.