Numatic (Henry) Electruepart Vacuum Cleaner Push Fit Accessory Tool Kit – 35mm for MFQ362 Stock Number: ES1591687

Overall rating

• Mike D Storrington
  4.0 out of 5

  Universal Vacuum Cleaner Push Fit Accessory Tool Kit - 35mm 03 November 2020

  Delivery within expected time frame. Both crevice tool and upholstery tool are a snug fit on the vacuum hose. However, the dusting brush was a very loose fit, and would fall off the hose unless it was the correct angle. Putting one layer of thick masking tape inside the dusting tool rectified the problem.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• David Webster Bexhill on Sea
  4.0 out of 5

  Happy with purchase 09 April 2020

  Purchased to supplement accessories not included with k archer vac, They fit well (35mm) and appear good quality

  Ease of fitting	5.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• IFR LONDON
  4.0 out of 5

  Works well ; head a little narrow 20 January 2018

  My cleaner tells me it works well, but that if the head were a little wider, it would, presumably, pick up more dirt, more quickly.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• rb Bicester, Oxfordshire
  4.0 out of 5

  could be better 19 January 2018

  delighted to receive and at first glance pleased. On fitting access's to hoover, disappointed as no click-in button and fit quite loose. yes, they are uni fit, but could be better.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• Mark Fillingham East Yorkshire
  4.0 out of 5

  Value For Money Attachments 31 October 2017

  A decent set of basic attachments. The brush could perhaps be better if was an oval or square shape, to get into corners more easily.

  Ease of fitting	5.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• A.J.Ball
  4.0 out of 5

  universal? 16 October 2017

  good quality fittings but did not fit our appliance.

  Ease of fitting	1.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• Angus Hutchison Inverness
  4.0 out of 5

  Value for money 19 June 2017

  This product was easy to fit and good value for money .

  Ease of fitting	5.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• Caroline Campbell Manchester
  4.0 out of 5

  Not for dysons etc 14 May 2017

  Would b fantastic if it was universal sadly did not read properly so does not fit my vac😞

  Ease of fitting	1.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Mr. M. Allan. Scottish Borders.
  4.0 out of 5

  Adequate for my needs. 06 February 2017

  I bought theses tools for my wood turning workshop. They will be used in conjunction with my dust extraction machine at the end of a session to clean up. I already have a hose that can take the tools and can fit my dust extractor. Adequate for my needs.

  Ease of fitting	5.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• Pat Holmes Kent
  4.0 out of 5

  Disappointing 04 November 2016

  Delivery excellent, product of good quality. Sadly being designated a 'universal' product means that you take a chance on the fitting. The internal diameter being over 2mm larger than the original. I needed to adapt with a rubber band to make it near airtight.

  Ease of fitting	1.0 out of 5
  Quality	5.0 out of 5
  Value	2.0 out of 5

Ratings-Only Reviews