Zanussi Fan Oven Element - 2000W Stock Number: ES139510

Overall rating

• Martyn Cardiff
  4.0 out of 5

  Saved myself a fortune ! 06 April 2015

  Didn't realise it was so straight forward to change the element 'til I watched the eSpares video. Although it wasn't as easy as the chap made out since working on a several year old oven it took a while to get the back panel off. The element wasn't an exact fit as one of the fittings was facing the wrong direction however it was easy to adapt. The element works perfectly and I now have a fully functioning oven once again. Thought I was going to have to buy a new oven but watched the video and had the confidence to change the element myself !!

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Les CT33DQ
  4.0 out of 5

  good quality product 28 January 2013

  the circular fan oven element i purchased was of good quality and was very easy to fit. With the video showing how to fit this part it so easy and only takes about 5 minutes. It certainly beats buying a new oven.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	4.0 out of 5

• Mr Fix It Newcastle
  4.0 out of 5

  Just so easy 21 November 2012

  Very simple and easy to fit, four screws for the internal back plate and one/two screws for the element. Disconnect the wires and re attach in the same order to the new one. Please be aware that for the Zanussi ZBF360 there are two possible elements, remove old element first as the mounting plate which has the connectors attached could have either one or two mounting screws.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	5.0 out of 5

• Mark
  4.0 out of 5

  Good Replacement Part 14 December 2011

  A cheap and easy to fit replacement for my Moffat 615X oven. Takes only a few minutes to change if you have the right driver heads. Only flaw is that the retaining clip on the element was the wrong way round for my model. Easily fixed by either removing it and turning it around or the lazy way, which I did, by bending the end of the clip the right way round. So far I have changed both the element and the fan in my old electric cooker for just over fifty quid buy buying spares from here. Easy to do and a lot more economical than forking out for a new oven.

  Quality	4.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	5.0 out of 5

• Anonymous bucks
  4.0 out of 5

  Moffat 18 January 2011

  The clip that holds it on is the wrong way round for a moffat oven,so turn it first. All so check it has not blown the switch, you can do this by removing the plastic cover holding a mirror under turn the switch the copper bars should touch both ends and part as you turn switch

  Quality	5.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	3.0 out of 5

Ratings-Only Reviews