Creda Main Oven Fan Motor Assembly for R561ER Stock Number: ES1029461

Overall rating

• JA Surrey
  3.0 out of 5

  Replacement Fan 02 November 2022

  Replaced Fan with no problems but the motor is noisy compared with old unit as not original part

  Ease of fitting	5.0 out of 5
  Quality	3.0 out of 5
  Value	4.0 out of 5

• MM Easy Ayrshire
  3.0 out of 5

  EG1000GX - needs plate removed and washers to fit 10 August 2021

  Tried to fit this item to an EG1000GX since the Site said it was a direct replacement but the supplied backing plate would not fit into the recess. Removed the plate and the fan would rub against the internal cover since the spindle was too long. Had to pack it with washers on both sides which is not ideal but it did work.

  Ease of fitting	2.0 out of 5
  Quality	3.0 out of 5
  Value	4.0 out of 5

• P Sniadek Manchester
  3.0 out of 5

  Not compatible 10 June 2017

  Well, it was a motor with the right position for the mounting screws, However, the spindle is way too long and I had to put the fan blades on backwards and bend them all over the place so they didn't hit the screws and didn't graze the oven's fascia. But, hey, ho, it worked. Not entirely convinced the description of "compatible" really hits the mark!

  Ease of fitting	2.0 out of 5
  Quality	3.0 out of 5
  Value	5.0 out of 5

• rg mcilwaine n ireland
  3.0 out of 5

  drive shaft 09 March 2016

  sorry fan was not an exact match, drive shaft was 10mm to long. had to remove motor and mount and fit 3 spacers to oven mounting plate to set fan back so as not to foul on oven back plate. 2 hrs extra work.

  Ease of fitting	1.0 out of 5
  Quality	3.0 out of 5
  Value	4.0 out of 5

• lionel cornwall
  3.0 out of 5

  right motor, wrong orientation 04 September 2013

  This was ordered to replace the oven fan on my belling cooker. All in all good value for money and quick delivery, BUT what I thought would be an hours job turned out to be in excess of 2 hours. The motor frame fixing holes are 180 degrees out from my old motor. The new motor came with 6mm tapped holes which fortunately for me I had a few 6mm set screws to use. Due to the motor having to be rotated to fit my cooker's fixing holes I then had to extend some wiring to allow the connections to be made to the motor. Eventually everything came together and we now have a working fan assisted oven again. Good value for money but a struggle to replace. Fortunately I am an engineer so could manage the modifications ok but may be a struggle for some one less skilled.

  Response by Chris on 04 Sep 2013

  espares stock many different Belling fan motors so it sounds like you ordered the wrong one. Always check with the full model and production number as changes can occur in production.

  Response by Chris on 04 Sep 2013

  espares stock many different Belling fan motors so it sounds like you ordered the wrong one. Always check with the full model and production number as changes can occur in production.

  Quality	4.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	1.0 out of 5

• Anonymous Bicester, Oxfordshire
  3.0 out of 5

  Great Fan but isn't a direct replacement! 25 April 2013

  The only way I could get this fan to fit my Hotpoint HAE60P was to apply a massive amount of spacers. Essentially all the screw holes line up great but the fan shaft is far longer than the original around 12mm, which doesn't sound a lot but trust me its more than enough for the fan blades to be trapped by the metal front cover!

  Quality	5.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	2.0 out of 5

Ratings-Only Reviews