Creda Main Oven Fan Motor Assembly for R561ER Stock Number: ES1029461
High quality spare part suitable for select models of Hotpoint, Creda, Indesit, Cannon, jackson and Belling cookers
Overall rating
Product Reviews
Write a review-
rg mcilwaine n ireland
-
Frank ferndown5.0 out of 5
Cheaper than a new cooker . 20 January 2016
The existing fan was about 10 years old & becoming very slow & frequently stopping ,& in my case , if the fan stops , the heating element wont come on . ( Consider a faulty door switch as well though but unlikely ) Fitting was easy , which also gave the opportunity to hoover out the cobwebs & generally check over . ( panels inside as well as rear covers need to be removed . ) This repair was intended as a short term fix before I renew the kitchen complete in about 12 months time . Had it been long term then a more expensive part would have been used , just in case . I now have a happy wife & a large tummy !. Thank you again E spares . a super company to deal with .
Ease of fitting 5.0 out of 5 Quality 4.0 out of 5 Value 5.0 out of 5 -
JRS Devon4.0 out of 5
Did what it should 13 November 2015
The terminals on the motor were positioned so that when it was fitted the existing electrical cables were barely long enough and it may make it difficult to fit a new heater element in the future. Also it was a shame that the heat shield was not included.
Ease of fitting 4.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5 -
J.PRICE Mid Wales5.0 out of 5
Excellent service 27 October 2015
Needed to replace on a 15 year old Belling cooker. Was unable to read the serial number but took the chance on this compatible spare part as the relative cost was not too expensive. Product arrived on time and was easy to replace. Working well at the moment, time will tell regarding quality.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
MD5.0 out of 5
Cooker runs quieter than it ever did. 22 June 2015
Easy to fit, runs very quietly - better than the original. Fitting was no trouble but the connectors were in a different position from the originals - not a problem.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
s England5.0 out of 5
Excellent replacement part 18 June 2015
Easy to replace, the oven has to come out of the housing and the back has to be removed though. A bit of a struggle with the terminations as they didn't quite reach the new motors terminal posts, but with a little thought worked out ok. Works just fine
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
steveg West Midlands4.0 out of 5
Easy to fit and Good Value 12 April 2015
Easy to fit once the outer covers of cooker were removed. Good value for money and quick delivery. Slight difference from original, but has done the job.
Ease of fitting 3.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5 -
Janeyb hampshire4.0 out of 5
Electrical fixings totally different to original 11 January 2015
Despite marking the fixings and taking the precaution of photographing the old fan in situ showing the connections we were flummoxed by this. The spare part is totally different so no quick in and out job. We had to get an electrician in to do it.
Ease of fitting 1.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Jonno Kent5.0 out of 5
Very quick fit. Highly recommended. 11 November 2014
This was fitted and running in under 1 hour. I recommend the insulation gasket as the old one seems to crumble easily. Remember the motor shaft has a left hand thread to remove the fan retaining nut.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
mikey1066 np238us5.0 out of 5
extremely good value 23 October 2014
Extremely good value quite easy to fit but think it should have come with a new asbestos type gasket as the old one tends to fall apart while dismantling old fan apart from that very pleased
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5
Ratings-Only Reviews
| Overall Rating | 5.0 stars | 5.0 |
|---|---|---|
| Ease of fitting | 5.0 stars | 5.0 |
| Quality | 4.0 stars | 4.0 |
| Value | 5.0 stars | 5.0 |
Based on the average of 6 ratings-only reviews
Order within 04h 28m 06s to be delivered tomorrow!
Order within 04hrs 28mins 06sec to be delivered tomorrow! (Choose UK Next Working Day Delivery)
Order within 04hrs 28mins 06sec for UK Next Working Day Delivery
Will this part fit my appliance?
Check Now- In Stock Available for immediate despatch
- UK Next Working Day Delivery Available About delivery
- We won't be beaten on price Price match guarantee
drive shaft 09 March 2016
sorry fan was not an exact match, drive shaft was 10mm to long. had to remove motor and mount and fit 3 spacers to oven mounting plate to set fan back so as not to foul on oven back plate. 2 hrs extra work.