Cannon Oven Door Roller Catch Stock Number: ES836131
Genuine spare part for select models of Cannon, Hotpoint and Creda cookers
Its a Hotpoint make.
-
Chris at eSpares says...
To source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Creda oven door roller catch purchase for c360e part did not come with screws which I only have one of from old catch where can I get them or should they have been supplied?
-
Chris at eSpares says...
Stock Number: ES492031 is the correct part.
how do i remove the outer glass from the side panel in order to access the door roller catch 1 Answer
canonC50GLK
-
Chris at eSpares says...
The roller catch should be in the oven body not the door panel. To access the catch remove the side panel.
I have bought the oven door roller catch but I now need to buy the bit it connects to on the door , but can not seem to find it, please advise, 1 Answer
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
it seems like the side panel has to come off to access the oven door roller catch the side panel has 3 screws down the front I removed these and the panel comes away at the bottom but does not want to come off at the top or back. Whats holding it please 1 Answer
-
Chris at eSpares says...
We think it is necessary to remove the hob top to access screws along the top edge. Also check that any screws on the back edge are also removed.
-
Chris at eSpares says...
Unfortunately we are unable to provide the dimensions of this part. The parts listed on our website are all model and serial number dependant (apart from universal parts). In order for us to locate the correct spares for your appliance we would need the model information requested. Without this we cannot guarantee that the part ordered will be the correct one for your appliance.
I have bought a Cannon oven door roller catch that fits into the main body of the cooker but cannot see how to fit it, please help 1 Answer
-
Chris at eSpares says...
This catch is shown on the manufacturers exploded diagram as being fitted on the oven facia frame on the right hand side. It will be necessary to remove the side panels to access and remove this catch.
I can see how to replace the thing on the oven door. But how do you replace the roller catch inside the body of the actual oven, please? And does this kit come with the thing on the oven door or is is just the roller catch.
-
Chris at eSpares says...
The oven door will come apart in a similar way to our video: http://www.espares.co.uk/advice/1/1151/how-to-repair-an-oven-door
The answer published on your website seems to relate to a different question
-
Christopher at eSpares says...
To fit this catch remove one door hinge to detach the door and then part the front and back panels of the door by removing the screws. for access to the catch.
Will this part fit my appliance?
Check Now