Hotpoint Main Oven Thermostat - ET50000/J5 for EW82P Stock Number: ES547003
Genuine spare part for select models of Hotpoint, Creda and Indesit cookers
Hotpoint DY46X double oven; fan does not turn straight away, sometimes requires a nudge to get it turning; even when it does turn the main oven does not always get to the temperature as set by the control knob. 1 Answer
Do I need to replace the fan and motor, and thermostat ? Oven ser no. 903165511
-
Chris at eSpares says...
The fan motor is the cause of your problem. Replace it with an original motor unless you are sure you can fit a compatible part.
Hotpoint DY46 main oven not working. Have replaced the element but still not heating up. Light comes on in oven but fan does not run at back of oven. Should the back fan come on straight away? 1 Answer
-
Chris at eSpares says...
Yes fan and element should start immediately. Check at the top for a cut out like Stock Number: ES491201 this should measure short circuit.
I have a hotpoint DY46X double oven with a bottom main oven heating fault. Something happened while the oven was on and it took out the 32amp breaker. When I tripped the oven back in everything worked apart from the bottom oven. When you move the temp con 1 Answer
- it is either the element is blown or the oven thermostat is faulty! check the resistance on the oven element first before ordering a new one
What is the tolerance between the setting by the control knob and the actual temperature in the oven 1 Answer
My current oven always heats up to a higher temperature than is set by the control knob by anything from about 10 degrees to about 40 degrees, with an average of about +20 degrees. Will a new thermostat correct this error or do I have to accept it. After all this is only a domestic appliance not a space capsule!
-
eSparesMalindi at eSpares says...
We cannot give out technical advice unfortunately. Please contact an engineer for help with this problem before replacing any parts.
Bottom oven has failed. Everything else works bottom fan, light top oven and grill. What should I expect if I meter the old one? Can you suggest anything else?
-
eSparesMalindi at eSpares says...
Sorry we cannot give out technical advice unfortunately. Please contact the manufacturer of your appliance or an engineer for assistance.
the gas rings and grill works but the oven will ignite for a short while then the gas cuts out would this be the correct part or is it the thermocouple gone the cooker is a indesit k 344(G)G S/N308192135 has already said all gas rings and grill inside oven works _with the exception of the oven able to ignite but does not stay on thankyou for any help you may offer
-
Rory at eSpares says...
Hi Rjb1957, I'm afraid I can't match your model number. Would it be possible for you to double check? Once I have a valid model number I'll be happy to find you the right thermostat.
Will this part fit my appliance?
Check Now