Stoves Oven Thermocouple - 1300mm for 050560030 Stock Number: ES545892
Genuine spare part for select models of Stoves, New World, Belling, Diplomat and Prestige cookers
-
Ashleigh at eSpares says...
This could be due to several things, please see https://www.espares.co.uk/advice/appliancetype/cookers-and-hobs for advice and tips
-
eSpares Staff at eSpares says...
No, this thermocouple is for the oven and the grill would be a different part, also because this part requires breaking a gas joint you would need a gas safe technician.
where can i find fitting instructions for thermocouple for 444447279 new world eye level oven 1 Answer
New World NW90G eye level oven model 444447279 serial No 00113626
-
eSpares Staff at eSpares says...
We do not supply fitting instructions, any part that breaks a gas joint must be fitted by a gas safe technician due to safety issues.
Oven lights but turns off , can be after 5 mins or after 30 mins??
-
Dean at eSpares says...
We do not supply fitting instructions, any part that breaks a gas joint must be fitted by a gas safe technician due to safety issues.
Hi,I have a belling oven,that will light but when you turn the control knob round to the desired gas mark number the flame remains low, is this a thermocouple fault,thanks, 1 Answer
Model No444449598
-
Chris at eSpares says...
If there is a good flame to the tip of the thermocouple then it is likely to be faulty.
Image only looks to be about 300mm, maybe 500mm. My failed TC is 1300mm
-
Chris at eSpares says...
This is listed for your oven and is 1300 mm long
I have a Vanette 7000 (B) GF ( No ign) oven. I replaced the thermocoupler and the oven lit and stayed lit the first time of trying. The problem is that after that the flame goes out as soon as I release the knob even after holding it in for some time. 1 Answer
Is there a solution or am i just looking at replacing the whole oven. If so is a direct replacement available?
-
Chris at eSpares says...
Check the burner flame on the thermocouple tip. If there is dirt or contamination the flame may not be hot enough to heat the tip and hold the thermocouple on
pilot light comes on with oven control knob then nothing happens. flame doesnt come on and slight smell of gas. has the thermocouple failed.
-
Chris at eSpares says...
It is likely that either the thermocouple has failed or there is a poor flame onto the thermocouple so not identifying the gas is lit.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
I HAVE ASKED FOR THERMAL COUPLING FOR THIS BUT DO I HAVE TO TAKE INDESIT PART OR DO YOU HAVE YOUR EQUIVALENT
-
Chris at eSpares says...
The correct part for your cooker is Stock Number: ES552503 As this is a safety item we recommend this part is fitted by a Gas safe engineer who may be able to advise further.
Will this part fit my appliance?
Check Now