Get The App From Play Store!

Skip to main content

Tumble Dryer Start Switch Stock Number: ES539048

Genuine spare part for select Ariston, Creda, Hotpoint and Indesit tumble dryers

Product Q&A

Ask a Question
By Gillian Lloyd - Chorley - 04 June 2017
  • Dean from eSpares
    Dean at eSpares says...

    It is likely to be the switch but you will need to examine both before deciding what part is required.

Answer this question

start button for indesit tumble dryer

By booth denis - leyland - 29 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    If the machine only runs when the button is pressed suspect the door lock Stock Number: ES552148 as this switch is not supposed to latch and the problem is likely to be the lock.

Answer this question

I have purchased a replacement start switch, but the video does not relate to my dryer. Please explain how to replace switch.

By David Moffett - Wokingham - 29 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    We are sorry but this is the closest video we have to your repair. To release the switch carefully prise off the button using a couple of small screwdrivers. Then use need nose pliers to press in the 'arrow heads' on the switch until it can pass back through he mounting hole.

Answer this question

just replaced the start switch but problem is the same as before, the start switch only functions if the switch is held in but the machine functions perfectly until you release the start switch.

By mike - Devon - 02 December 2014
  • Chris from eSpares
    Chris at eSpares says...

    Depending on your 'version' this problem is likely to be the relay PCB Stock Number: ES865631 behind the top panel or the door lock Stock Number: ES552148 if no relay is fitted (later models).

Answer this question

My old start switch, when I push it in power comes on but when I let go power goes off. I've replaced the switch but the same happens so espares have sent me another switch which does exactly the same. The switches are not clicking and just springing straight back out. Am I doing something wrong or is it possible that the 2 switches I've been sent are faulty?

By Bagy - Birmingham - 13 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    These switches contact momentarily and then release. This depending on model activates either a relay, door lock or control board that starts the machine.

Answer this question

I have watched the video previously posted as an answer and i know how to remove fascia, etc. How do you remove the start switch itself??

By nickynoo - scotland - 06 September 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi again nickynoo, the switch should be able to be pulled away from the PCB, or whatever it's connected to; you'll probably need to use a bit of force, but it should just be a case of unclipping the old switch and inserting the new one.

Answer this question

Some more detail on the steps to remove fascia and switch would be very useful

By BMul - - 30 August 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi BMul, this video should help you out: http://www.espares.co.uk/advice/washing-machines/a/7/1298/how-to-replace-washing-machine-controls-hotpo.html It's a washing machine featured in the video, but the process for your dryer will be very similar.

Answer this question
By nickynoo - - 23 August 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi there, you'll need to remove your dryer's fascia to replace this switch. Check out this video for help: http://www.espares.co.uk/advice/washing-machines/a/7/1298/how-to-replace-washing-machine-controls-hotpo.html It's a washing machine featured in the video, but the process for your dryer will be very similar.

Answer this question

My Proline TDC6A tumble dryer runs for about 5 minutes then stops. After about 10 minutes it can be restarted. I have been told this is due to a faulty start relay. Everything appears to be operating correctly otherwise; it is heating, filters and condenser are clear, drum and bearing are fine - it just keeps stopping. Is this the part I need? If not, what is your advice, please. Thanks.

By FlyerSteve - Huddersfield UK - 29 March 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    If you have received technical support and confirmed this is the part you need, then this should be the correct part. This is the start switch behind the front fascia panel.

Answer this question

Will this part fit my appliance?

Check Now

Tumble Dryer Start Switch

£13.05
(inc. VAT)
£13.05