Whirlpool Tumble Dryer Vent Hose - 3m for AWZ7813 (857578115032) Stock Number: ES503440
High quality vent hose for all models of tumble dryers that require a vent hose with a diameter of 10.2cm
-
Chris at eSpares says...
If your dryer has the adapter fitted to the door that has an internal diameter of 4 inches or 100 mm this will be suitable.
How long can the hose be on a creda tumble dryer ans is there a maximum vertical and horizontal length , and what diameter should the hose be 1 Answer
I am moving the dryer into the garage so looking for the best place to put it
-
Chris at eSpares says...
Generally vent hoses should be as short as possible and avoid ducting in a downward direction. They should be of a minimum diameter of 4 inch (100mm) and no longer than a couple of metres in length and avoid sharp bends.
is the hose combustible? video says fits to max. vent outlet diameter of 4"- so will it fit a slightly smaller diameter? 1 Answer
I read a lot about tumble dryer fires in the US
-
Chris at eSpares says...
Many dryers in the US are heated by gas so this would not be suitable. In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
-
Chris at eSpares says...
This hose will replace your existing hose if it has a diameter of 100 mm or 4 inches across. IF you do not have a hose you may need additional fittings to attach this hose.
Can you please clarify how to replace the vent hose on a White Knight 44AW dryer, my original one has just disintegrated, I pulled it out after buying a replacement hose but found it doesn't just slip in is there a connector or something I should know about and can you advise how to effect repairs at home. many thanks, Pete.
-
Chris at eSpares says...
The correct hose is Stock Number: ES185987. We do not have a video for replacing this part.
I have a TVM 560 Aquarius tumble dryer Hotpoint. The vent looks like it is a screw in mechanism so what part would I need to attach the hose?
-
Chris at eSpares says...
If your dryer already has this part fitted on the back Stock Number: ES802589 the hose will simply screw into the threads on the inside of it.
-
Chris at eSpares says...
It is suitable for all dryers using a 100 mm (4 inch ) hose.
I have a White Knight CL447WV purchased 20.02.2007. Will this hose fit as access seems restricted at rear of machine, or do I have to take all the panels off? There does not seem to be a fitting to unscrew as others have suggested. Thankyou!
-
Chris at eSpares says...
It appears your hose (Stock Number: ES914753) enters deep into the machine to connect. Either replace the whole assembly or if there is enough hose in good condition you may be able to join it using Stock Number: ES503452
Just wondering if this is right hose for my wk427 White knight
-
Chris at eSpares says...
If your dryer's outlet has a plastic ring with a screw thread and 4 inch or 100 mm diameter this will be suitable.
Proline dryer model TDV60 with 10.2cm hose.
-
Chris at eSpares says...
Stock Number: ES1639865 should connect your hose to most 100 mm wall vents.