Get The App From Play Store!

Skip to main content

Tumble Dryer Thermostat Kit Stock Number: ES487865

Genuine spare part for select Ariston, Creda, Crusader, Electra, Hotpoint, Indesit, Jackson and Proline tumble dryers

Product Q&A

Ask a Question

I checked both thermostats for continuity..all ok...the heater element had a damaged plate..so fitted a new heater... vacuumed out all dust and fluff...Still not heating..Any suggestions please?

By Chris - Gloucester - 20 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    For information to diagnose your problem see our video: How to Diagnose Tumble Drier Drying and Heating Problems: www.espares.co.uk/advice/9/2050

Answer this question

Have cleaned out Condenser and removed fluff from front filters. Any ideas?

By P P - Berkshire - 02 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    Check the container seal and fitting for damage and blockage in the connector to the container from the machine.

Answer this question

thermostate for Creda Simplicity tumbledrye rT620 CW

By steve smith - birmingham - 18 October 2015
  • Chris from eSpares
    Chris at eSpares says...

    Stock Number: ES1020444 is likely to be the same kit but not supplied through Creda/Hotpoint but from the thermostat manufacturer direct.

Answer this question

My tumble drier doesn't seem to be doing the reverse action to stop clothes getting tangled. What is wrong here?

By Anonymous - suffolk - 06 February 2015
  • Chris from eSpares
    Chris at eSpares says...

    If the motor is slow to start it may be the motor capacitor passing not enough power. if the machine never pauses but only tumbles one way it is likely to be the reversing timer or timer depending on model.

Answer this question
By pluggy - wallasey - 05 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    For information to diagnose your problem see our video: How to Diagnose Tumble Drier Control and Program Problems http://www.espares.co.uk/advice/9/2049/how-to-diagnose-tumble-drier-control-and-program-problems-

Answer this question
By Laura - birmingham - 02 June 2014
  • Chris from eSpares
    Chris at eSpares says...

    See our diagnosis videos in our Advice Centre at: http://www.espares.co.uk/advice It is likely the problem is one of these 'Thermostats'.

Answer this question
By Dave - - 08 January 2014
  • Chris from eSpares
    Chris at eSpares says...

    We recommend that both are changed together as this will prevent two of the same type accidently being fitted. The one with the spot we believe is the overheat cut out so will have the higher operating temperature. The other without the spot will be the lower temperature cycling thermostat.

Answer this question

Old thermostats in my Creda are KSD 301 with numbers 105 and 130. They have no colour code dots. The new thermostats in my order received two days ago are marked YELLOW 1488 23-13, and GREEN 1582 23-13. Which of the two new thermostats should replace which of the old ones please ?

By James22 - Southampton - 20 December 2013
  • Chris from eSpares
    Chris at eSpares says...

    One thermostat is a overheat cut out that will trip and need to be replaced if it overheats and a cycling thermostat that cuts in and out as it reaches and maintains the drying temperature. If you replace both thermostats at the same time you will use one of each type This will ensure your appliance is working correctly and safely.

Answer this question
By Jimmy - Merseyside - 13 December 2013
  • Chris from eSpares
    Chris at eSpares says...

    These parts should replaced for the same type, one has a coloured 'spot' between the terminals and must be replaced with one with a spot on.

Answer this question

Dryer runs for 10 -15 mins then trips main circuit breaker and not the washer/dryer circuit breaker. Circuit breaker will not reset. Can leave it for a while and it will run again for a few mins. Any ideas would be great. Thanks.

By iampierre - Dublin Ireland. - 14 October 2013
  • Chris from eSpares
    Chris at eSpares says...

    If your drier is a condenser drier it is likely water is getting onto the heater element causing an earth leakage current and tripping the RCD on the fuse board. Check the condenser water is draining corectlly and not blocked by fluff.

Answer this question

Will this part fit my appliance?

Check Now

Tumble Dryer Thermostat Kit

£22.99
(inc. VAT)
£22.99