Get The App From Play Store!

Skip to main content

Creda Washing Machine Bearing And Seal Kit for WMA30PE Stock Number: ES487850

Genuine spare part suitable for select models of Hotpoint, Indesit, Ariston and Creda washing machines

Product Q&A

Ask a Question

My washing machine is making a noise when turning the drum is it a bearing kit i need? Thanks

By Anonymous - - 21 March 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi there. Noises during drum rotation will most likely be caused by one of two things. It'll be either something stuck inside the drum tub - bra wiring is a common thing to get lodged in there - or it'll be damaged bearings. You're gonna hope it's not the bearings, because these are a big job to replace. The first thing to check (after unplugging the machine!) is for lodged clothing or bra wiring. To do this, remove the element from its housing below the drum, and use a torch to look inside, as well as something like a straightened clothes hanger to poke around inside. After that, do the same for the sump hose. You can also look inside the drum, see if any of that elusive bra wiring is poking out of the holes. If after all that you can't find anything, or the machine is still making noises, you'll need to replace the bearings. Check out this video for help on how to remove the element and sump hose, as well as replacing the bearings: http://www.espares.co.uk/advice/washing-machines/a/7/1401/how-to-replace-the-bearings-on-a-washing-mach.html

Answer this question

I need to change the bearing on a Hotpoint Aquarius Extra WMS38 1200 spin washing machine. Barcode on the rear of the machine reads: 0045 WMS38P 05 165505 Thanks for your help.

By DoItMyself - Fort William - 13 July 2009
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Yes this bearing is listed for your model number so should be the correct part.

Answer this question

I have just fitted your 35mm baring kit for Hotpoint WDL 540g 920120281 with no problems. Im just finishing off but have a problem fitting the internal cold feed hoses. The machine has a "Y" form external cold fill hose. Inside there are two hoses, one clealy goes to the top of the dryer module, but which one? I cant find a home for the the second hose from the inlet valves. can you help?

By Andy - Orpingtom Kent - 26 May 2014
Answer this question

Will this part fit my appliance?

Check Now

Washing Machine Bearing And Seal Kit

£21.49
(inc. VAT)
£21.49