Creda Washing Machine Bearing And Seal Kit for WMA30PE Stock Number: ES487850
Genuine spare part suitable for select models of Hotpoint, Indesit, Ariston and Creda washing machines
i want changed the bearing hoover HNL6166-80 model, but i cant separate the back drum and plastic cover whey? 1 Answer
-
Chris at eSpares says...
On some drum assemblies they have stopped bolting the front and back together and now weld the two parts to reduce the chance of leaking. Unfortunately if you have a welded drum it is not usually possible to replace the bearings as you cannot dismantled the drum and reseal it.
-
Chris at eSpares says...
Some model variants use a welded tub like Stock Number: ES1090783. This cannot have bearings replaced.
I have an Indesit IWE7145B washer that sounds like its going into hyperspace when it starts spin cycle, could it be the bearings?. 1 Answer
-
Chris at eSpares says...
It suggests Bearings are failing. The drum on your machine is not repairable as it is welded together and cannot be parted and re sealed after bearing replacement. It is likely to be cheaper to have a fixed price repair with Repaircare than replace the drum unit Stock Number: ES871622
Hi. my hotpoint wdd 960 P (UK) C model has a bearing noise. However, after strip down, my repair guy finds that theres no screw fixings to seperate the inner and outer drum. According to the hotpoint website, it is possible to to buy the bearings as a replacement item for this specific model. Can someone please clarify or guide us how to seperate the drums/tub. Thanks in advance.
-
Chris at eSpares says...
The drum on your machine is not repairable as it is welded together and cannot be parted and re sealed after bearing replacement. It is likely to be cheaper to have a fixed price repair with Repaircare than replace the drum unit Stock Number: ES1090783
INDESIT PWE 91672W rattling and sounds like it's about to take off. Think it's the bearings but not sure, or which bearings I'll need. 1 Answer
-
Chris at eSpares says...
The drum on your machine is not repairable as it is welded together and cannot be parted and re sealed after bearing replacement. It is likely to be cheaper to have a fixed price repair with Repaircare than replace the drum unit Stock Number: ES1087441
I am planning to replace the bearings in the machine myself. I wanted to confirm that it can be done on this model. I know which bearing kit is required but will there be any other parts that I could or should replace as I am doing this?
-
Chris at eSpares says...
It is advisable to also replace the seals on the drum shaft and the tub seal to prevent leaks and bearing failure.
got a loud ratling sound when it gose to spin sykle tride the drum for play there is no play it a hotpoint WMA34P could it be sumting else?? 1 Answer
-
Chris at eSpares says...
if it only occurs when the drain pump is running check the filter for coins and debris. Also check if the weights fixed to the drum are loose by shaking the drum when the top is off (remember to unplug first).
my washing machine sounds like a jet engine taking off and something rattles inside when spining 1 Answer
What is wrong with it? Its a Hotpoint Aquarius WML 540G(UK)C Eco tech 6kg S/N911194681 -80692300000
-
Chris at eSpares says...
It sounds like you may have faulty bearings. Check for any play or movement of the inner drum at the front edge next to the seal. Spin the drum by hand to confirm worn bearings. If this is the case your machine has a welded drum and would require Stock Number: ES871622 to repair it.
-
Chris at eSpares says...
Many Hotpoints like the WMF740KUK use a welded drum assembly. It is not possible to replace the bearings on these and you will need a complete drum. Contact REpaircare for a fixed price repair that can be cheaper than the cost of the new drum.
I have a hotpoint WT721P and I need to replace the drum bearings. The problem I have Is trying to separate the drum cases there is no screws just tabs and appears to be glued together . What do I need to do? 1 Answer
-
Chris at eSpares says...
Your machine uses a welded drum and it is not possible to dismantle it and replace the bearings and then re seal it successfully. The only repair possible is a new drum assembly.
Will this part fit my appliance?
Check Now