Brandt Oven Door 3-Sided Seal Kit - 1.5m for PFB406SK3 Stock Number: ES486644
High quality spare part suitable for select models of ovens
my control knobs on my belling 335wh oven keep on melting and going soft! should I replace then oven door seal ? 2 Answers
- Sounds like your oven cooling fan is not working
-
Rory at eSpares says...
Hi andy1976, it sounds as if heat is escaping from the top oven, causing the control knobs to melt. A damaged door seal is the most common reason for this happening. Check out the video on this page for help fitting the door seal.
model no 444449579 serial no 00930805 door seal
-
Ashleigh at eSpares says...
Universal parts are suitable for most appliances and do not have a specific 'fit list'. If your appliance matches the specifications in the description, this item will be suitable.
-
Chris at eSpares says...
'Goal post' refers to a 'top bar' with vertical 'posts' so creating a square shape with the lower edge missing.
The existing lower oven is around 33 years old and is goalpost design with rounded corners attached with clips?
-
Chris at eSpares says...
The clips supplied with this kit will give 'square' corners but it should be possible to use this kit.
Do I need to use a heat resistant sealant also as the seal will actually be fitted on the door not the oven surround. 1 Answer
there would be quite a gap between the hooks and the original seal was stuck down as well as hooked. My cooker is a Leisure Bistro 55 ng 5767.
-
Chris at eSpares says...
The seal should not be stuck down just held taught by trimming a little shorter than the actual length and stretching into position.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Its a double oven size in one.
-
Chris at eSpares says...
Universal parts can be used on many Appliances but may fit slightly differently to the original. Where possible we recommend using the original part unless you have checked the dimensions match and can make minor modifications if required.
Can a universal seal kit be slided in to place as on my stoves 050551109.?The seal on my oven has no clips? 1 Answer
The seal on my top & main oven has no clips and the seal just slides into place as described in the maintenance book that came with oven.It says it can be replaced by sliding a new one in then trim to size. Will this unversal kit work?
-
Chris at eSpares says...
It may be possible to modify your oven to accept this seal but I would only recommend this if you cannot obtain the original part. The oven has been designed to use the original seal and therefore is likely to work as good as possible with that part, this may not be the case with an alternative.
-
Rory at eSpares says...
Hi Gcc8361 This door seal will fit your oven if it is a 3 sided oven. If it is 4 sided this seal will fit it: http://www.espares.co.uk/part/cookers-and-hobs/p/1092/0/0/0/131929/universal-4-sided-oven-do.html
-
Samara at eSpares says...
We would always recommend a genuine part, instead of a universal part, for your oven if one is available. Please enter your model number in the search facility above to see if we carry the genuine part for your oven prior to ordering this universal part. If you’re not sure where to find your model number on your cooker, please have a look at our guide: http://www.espares.co.uk/findingmodelnumbers.aspx. This oven seal is 1.5 meters in length and is meant to be cut to size for your oven.