Neff 15W E14 Fridge SES Incandescent Bulb - Warm White for K3990X6/03 Stock Number: ES478313
Universal spare part for fridge freezers that match the specification listed
Really seems tight fit - cant remove at all.
-
Chris at eSpares says...
If you look at the cover images on Stock Number: ES1246543 you will see there are two locating 'hooks' on either side that spring out to hold this in place. To remove carefully squeeze the sides as it meets the cabinet to unhook and lift off.
-
Chris at eSpares says...
We do not have detail but believe this cover clips into place so try and carefully unhook either side and lift off.
-
Chris at eSpares says...
The light cover clips over the base. To remove you have to pull the edge away and off the base. Try using an adhesive tape to stick on the lens side and pull away from the holder.
Hi , when I search for fridge bulb for samsung rl41wgtb this comes up even though old one was 40w, is it compatible? Thanks
-
Chris at eSpares says...
No, the correct part is Stock Number: ES1540031.
both bulbs have blown in my Neff fridge and when I replaced them they still do not work
-
Chris at eSpares says...
The bulbs may have damaged the door switch. Check out if this needs replacement.
-
Chris at eSpares says...
The lamp cover simply clips into place and is held by 'tabs' at the widest part of the cover as these go into grooves to hold it in place.
HOW DO I REMOVE LAMP COVER TO REPLACE LAMP BULB IN LEC SLIMLINE REFRIGERATOR MODEL NO 78005061 SER NO R-106 1 Answer
-
Chris at eSpares says...
We are sorry but do cannot find any details on a LEC 78005061 to identify how to remove the lamp cover. However if it is the sane cover as Stock Number: ES922560 then this has two 'tabs' on the left side of the image. Squeeze the tabs together and hinge the cover off.
The lamp for my Samsung RL38SCBP Black Fridge has blown. What is the correct replacement lamp and how do I take off the cover. There is no screw anywhere.
-
Chris at eSpares says...
According to the information I have it appears that your model may have a strip of LED lights behind a plastic 'window'. To remove the window carefully use a blunt knife or flat bladed screwdriver to lift one lower corned and clip it out, then repeat on the other side.
My light doesn't work and it's not the bulb. How do you check the switch is working? It's a Santo 1602 IU model with the bulb at the front on the roof of the fridge. 1 Answer
-
Chris at eSpares says...
The door switch can be carefully prised out with a flat blade like a blunt knife or paint scraper, then check with a meter.
how do I remove the lamp cover
-
Chris at eSpares says...
There are a number of ways the cover may be fitted. Normally there is a screw at one end and the cover just clips in place. If no screws are present then it is likely it will just clip over or into the fitting.