Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Universal Washing Machine/Dishwasher Drain Hose - 2.5M Stock Number: ES478297

Compatible spare part for washing machines and dishwashers with a 22/29mm outlet diameter

Product Q&A

Ask a Question
By Jenna mckeown - Scarva - 13 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    Check the pump connection is 21 - 22 mm to confirm suitable.

Answer this question
By Marion CLarke - Somerset - 09 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    Stock Number: ES1625962 should be suitable to extend the hose but check the hose end is 21 mm.

Answer this question
By RTCD - United Kingdom - 27 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    You will need to measure the outlet connection on your appliance to ensure this part will fit.

Answer this question
By Gilbert - Bromley - 15 March 2015
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question
By Lewie - - 16 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    Yes.

Answer this question
By Max - - 26 April 2014
  • Chris from eSpares
    Chris at eSpares says...

    We can only confirm original parts but it is likely if you check that the pump spigot will be the same diameter as one of the hose ends.

Answer this question

Drain hose perished

By bopeep - Swansea - 18 April 2014
  • Chris from eSpares
    Chris at eSpares says...

    We can only confirm the original hose. if you wish to use this hose you will need to confirm the internal diameter of the hose as it attaches to the pump.

Answer this question
By geordie - - 21 January 2014
  • Chris from eSpares
    Chris at eSpares says...

    This has the two most common sized fittings on either end and should fit your appliance as well as most others in the domestic market.

Answer this question
By Mairn138 - Scotland - 02 March 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi Mairn138, this hose does indeed come with the u-shaped part.

Answer this question

My original pipe goes from a 21mm straight connector at the W/M (rubber end fixed with a jubilee clip) to a standard 21mm fur tree spigot in the sink waste plumbing system (rubber end push on fitting). So both ends are 21mm (internal diameter). Does this mean that this pipe will NOT fit?

By swinster - - 28 September 2010
  • I think you need 21mm connectors at both ends of the hose. With mine I had to cut off the 29mm end and use a 22mm screw-in Plumb-Sure adaptor from B&Q. By Bob - Lymm - 30 October 2012
Answer this question