Get The App From Play Store!

Skip to main content

Universal Washer and Dryer Stacking Kit Stock Number: ES187394

Universal stacking kit suitable for most washers and dryers measuring 60cm across

Product Q&A

Ask a Question
By Anonymous - - 09 February 2015
  • Chris from eSpares
    Chris at eSpares says...

    This will be suitable providing it is possible to remove the feet or wheels from the base of the dryer to enable it to rest on a flat base. The load of the dryer will then be spread around the joint between dryer and washing machine.

Answer this question

Does this stacker have a pull out shelf? Not clear with this image nor mentioned in description. Thanks

By Tess - sheffield - 14 September 2014
  • Chris from eSpares
    Chris at eSpares says...

    The kit with shelf is Stock Number: ES1431045

Answer this question
By domman81 - - 26 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    Depending if the rear feet of the dryer are not overhanging the back of the washer then it should be suitable.

Answer this question

My washer is beko measurements 85x60x60 my tumble dryer Hoover 85x60x59 cm wil stacking system be ok

By Anonymous - Derby - 13 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    Yes.

Answer this question
By Anonymous - sheffield - 23 March 2014
  • Chris from eSpares
    Chris at eSpares says...

    This is approximately 600 deep and due to its construction will allow a slightly longer appliance to fit. You may have to use additional support at the back on the washer it the form of a strip of wood 50 mm wide and the depth of the feet.

Answer this question
By gaz - stoke - 02 March 2014
  • Chris from eSpares
    Chris at eSpares says...

    This may be suitable however check that the lip around the edge would not foul your doors and stop them opening.

Answer this question
By helen - durham - 17 January 2014
  • Chris from eSpares
    Chris at eSpares says...

    This should be suitable if it is a vented dryer. If it is a condenser dryer check with the washing machine manufacturer.

Answer this question
By Anonymous - Oxford - 12 January 2014
  • Chris from eSpares
    Chris at eSpares says...

    Be careful stacking in this way as some dryers are very heavy and some fridges only have three 'feet'. This could be unstable and dangerous. It may be better to stack fridge onto dryer. You will not find a dedicated kit to do this and the locating lip may also fowl the door opening on the fridge.

Answer this question
By RB York - - 24 November 2013
  • Chris from eSpares
    Chris at eSpares says...

    It is adviseable to check with the manufacturer if it is a condenser drier as some manufacturers do not recommend this due to the weight of the drier.

Answer this question

The indesit wasking machine is slightly rounded at the front too.

By Gaby - Enfield - 11 July 2013
  • Mathew Betteridge from eSpares
    Mathew Betteridge at eSpares says...

    Whilst it is eminently posible eSpares do not recommend stacking machines from different manufacturers due to weight and build specifications. Thanks.

Answer this question