Main Oven Circulation Fan Motor - 22W Stock Number: ES1548541
Spare part for select models of Beko and Grundig ovens
The new motor runs fine when cold, Noisy above 170 degrees and stopes above 220 degrees , will this run in. 1 Answer
It seams as if the motor gets tight when hot. I will see how it is after a week. Hoping it will run in.
-
eSpares Staff at eSpares says...
We wouldn't expect a new motor to cause a noise but double-check the fan is not catching on the back panel and the fan is fitted correctly
Hi I think my motor or fan isn’t working. Not sure how to tell which one. The fan started to slow in it’s spin and has eventually stopped altogether, the oven still heats nicely as we only recently replaced the heating element but food takes twice as long if not longer to cook and cooks at the back of the oven quicker than at the front. If we order this part does it come with the motor and the blade? Thanks
-
Chris at eSpares says...
This is the motor only and is likely to resolve your problem, simply transfer the fan blade from the old motor to this one.
The fan still rotates but I am noticing some uneven cooking, but the worst thing is the noise when the oven is turned down from 200 to 150, it sounds like the fan is catching some metal. Will this stop the noise issue? Thankyou 1 Answer
-
Dean at eSpares says...
If the main oven fan was noisy you would normally hear it as soon as it is switched on, check the cooling fan as this comes on when the oven has heated up. Also, check the door and seal if you are getting uneven cooking.
Hi, I've just purchased your replacement fan motor and I can see a way of removing the fan from the motor so I can replace the old one. I've purchased the main oven fan motor for a lamona lam 4601 your stock number is es1548541 Part number is n16-f30. I hope you can help!! Regards Tim woodham
-
Chris at eSpares says...
To remove the main fan blade hold the fan and try turning the nut clockwise as we believe it has a 'left handed' thread.
I have replaced the main fan motor on a Beko OIF22300X but the replacement fan was not identical to the original. I wasn't sure which way round the connections should go on the new motor. Can anyone confirm which direction the fan should rotate? 1 Answer
-
Chris at eSpares says...
This is an AC motor and will run in the same direction even if the mains power connectors are reversed.
THE OVEN SWITCHES ON AS NORMAL WITH THE FAN RUNNING AND HEATS UP BUT THEN THERE IS A REALLY LOUD SCREECHING NOISE VERY HIGH PITCHED WHICH "WINDS DOWN" UNTIL IT WOULD SEEM THE FAN STOPS/SEIZES? THE NOISE STARTS AGAIN AFTER A SHORT WHILE AND REPEATS AND THIS ON/OFF PROBLEM CONTINUES ALL THE TIME IT IS SWITCHED ON. IS THERE A CURE OTHER THAN A NEW FAN AND WOULD THE ES1548541 MOTOR BE THE REPLACEMENT IF NECESSARY?
-
Chris at eSpares says...
This motor is likely to be the problem see our video: How to diagnose problems with your oven: www.espares.co.uk/advice/1/2145
the fan is working but there is no heat do i need to replace fan or is there a heat element 1 Answer
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven: www.espares.co.uk/advice/1/2145
Oven OIF22300X - The existing motor has a pressed aluminium mounting bracket rather than a casting as shown in the picture. Is it possible to find out the diameter of the mounting holes and length of the spindle on this part? I can send a photo If it would help. Many thanks - David
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and PRODUCTION number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
replaced heating element and shortly after fan stopped until i touched it same happens the next day after seems not to have enough power to just start moving once touched its fine
-
Chris at eSpares says...
The bearings are sticking replace the motor.
Will this part fit my appliance?
Check Now