Magnetic Fridge Freezer Door Seal -130cm x 70cm for RT2BSCSW Stock Number: ES1539567
High quality spare part for all models of 130cm x 70cm refrigerators
Dimensions are approx. 60 cm x 60 cm
-
Chris at eSpares says...
We have no information as to whether this seal can be fitted successfully on your appliance.
Please advise on the necessary cleaning & preparation required & the type of glue needed to sucessfully glue the corners of the universal fridge door seals sucessfully. 1 Answer
Please advise on the necessary cleaning & preparation required & the type of glue needed to successfully glue the corners of the universal fridge door seals reliably. Clearly state the cleaning products which will provide a secure adhesive key for the glue and the order in which the corner seal faces are attached in order to produce a fully airtight joint. I have already attempted to use super glue without any lasting success.
-
Chris at eSpares says...
We believe the best results will be obtained with a flexible product such as Evostic contact adhesive or a silicone sealant.
I have fitted the universal door seal. Unfortunately I couldn't find the video but worked out how to tuck it in behind. I haven't done any glueing yet but I have shut the door and particularly in the corners it is not sealing when the door is shut? Do you have any advice
-
Chris at eSpares says...
Try warming the seal with a hair dryer to soften and reshape it. This will 'set' once left to cool.
What glue should be used to glue the strip corners together? Where should the glue be applied to ensure the cut corners are attached together providing an air-tight connection? I can't imagine how this is done. Should the corners be glued together whilst the strips are attached to the fridge, or before attaching to the fridge? Thanks
-
Chris at eSpares says...
The corner fixings can be glued with a contact type adhesive. If cut correctly there will only be a very small gap that should not result in a significant leak. This could be improved by using silicone sealant on the corners being joined.
WHIRLPOOL ARG992K/K/G/R -GB
-
Chris at eSpares says...
Although it may be possible to use this Stock Number ES499835 will fit your appliance.
My existing door seal is 408 cm. This door seal is 400cm Will I be able to stretch this seal by 8cm ?
-
Chris at eSpares says...
This seal should not be stretched to length.
Can you give the exact length of the long side of this part, with the corner piece fitted as it is not clear whether the 130cm includes the corner piece or excludes it. My freezer's existing seal is 131cm along the long edge and I am attempting to find a replacement. Also the height and width of the product would be useful.
-
Chris at eSpares says...
The two joining areas are mitre cut allowing it to be joined to give the total size given. Therefore it would be too short for your appliance.
I have purchased this seal. Instructions on web site says glue corner pieces into position. No glue supplied. What glue is required ? 1 Answer
-
Parminder at eSpares says...
We would recommend a glue that provides a high strength bond. Please see stock number ES1740115.
-
Chris at eSpares says...
This has a magnetic seal that is not normally used on chest freezers but can be removed. It may be suitable if it can be fitted around the edge of the top inner lining.
-
Chris at eSpares says...
We do not have details of model compatibility but it is likely to fit. Please read part description carefully before ordering to check suitability.