Miele Washing Machine Drain Pump (Round Top Screw On) : Askoll M231 XP (M224 XP) for W439 Stock Number: ES1087464
Fits most washing machines matching the specifications, please check before ordering
-
Chris at eSpares says...
The correct pump is Stock Number: ES1249541. Universal parts can be used on many Appliances but may fit slightly differently to the original. Where possible we recommend using the original part unless you have checked the dimensions match and can make minor modifications if required.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
machine getting on but works perfectly only noisy drain pump but if I can get the cheaper pump brilliant
-
Chris at eSpares says...
This should be a suitable replacement for the pump in your machine.
-
Chris at eSpares says...
We believe this pump is a direct replacement for your machine.
Hi. can you confirm that the Askoll M224 XP universal pump is compatible with the above machine please?
-
Chris at eSpares says...
As this pump has been referenced against this model it should be a direct replacement.
since i purchased this pump it runs all the time when in all modes is there a modification required? 1 Answer
LG wm1480fhd
-
Chris at eSpares says...
This is a 'standard' type drain motor and can only run when the control board is telling it to. Raise the outlet higher than the water level to ensure it is not just syphoning out. For information to diagnose your problem see our video: How to diagnose washing machine control and program problems http://www.espares.co.uk/advice/7/1793/how-to-diagnose-washing-machine-control-and-program-problems
LG washer - model F1256QD - leaks badly! Everything's been working fine since new, till I unscrewed the pump filter drain plug in the front of the machine to clean it as per instruction book. Now I have screwed the plug back in as far as it'll go, water runs out at a fast trickle from around the plug. First I thought I'd missed out a washer, but the only one appears to be integral with the plug body. How can I test it for water tightness without having another flood? Many thanks!
-
Chris at eSpares says...
Some filters can easily be fitted 'cross threaded' Remove it and carefully check you are offering it to the machine 'squarely' as yo refit. Pour one glass of water into the drum or drawer to check for leaks before filling the machine.
I already ordered this item, but for safety sake, kindly ask you to confirm that this drain pump is compatable for my model washing machine Bosch WVT 1260. Thank you.
-
Chris at eSpares says...
This is fully compatible with the BR/01 version of your machine and is likely to be the same as your machine but without the full model number we cannot confirm this.
-
Chris at eSpares says...
We can only confirm the manufacturers original spares. Compare images of this and the original and decide if you wish to try it. We will of course (subject to our returns policy) accept a return if it is not suitable.
Performs all other functions.
-
Chris at eSpares says...
There can be a number of reasons such as worn brushes or an out of balance load. For more details see our video: http://www.espares.co.uk/advice/7/1730/how-to-diagnose-washing-machine-motor-problems