Flymo Lawnmower Motor Assembly for Hover Compact 350 Stock Number: ES1069318
Genuine spare part for select models of Flymo lawnmowers
Just recieved my new motor this morning, very speedy delivery indeed, The problem i have is i removed the older motor without realy checking exactly where the brown and blue wires were connected, and now i,m not sure where they go, any help would be greatly apreciated.
- They can go either way.
- I did check before removing the old motor. The blue lead goes to the rear of the mower, the brown to the front. A bigger problem for me was that there did not appear to be any way of knowing which way round the motor should be mounted. I decided it didn't matter or it would have been indicated on the motor. Anyway the new motor works a treat so either I was right or I mounted the motor the right way round by chance. I suspect it doesn't matter.
My motor serial is5150177-00(or66). The circular plate on the opposite end to the belt pulley is not fitted to my motor.
- I've just changed my 350 motor and the new one had a plate on top, its just a product improvement to give some protection to the top of the unit, it still fits ok.
-
Rory at eSpares says...
Hi Jonnojude, this motor will fit your HC350.
-
Chris at eSpares says...
We have not been able to identify a product recall for your appliance and suggest you contact flymo direct at: http://www.flymo.com/uk/contact-us/e-mail/
Serial 61802967. Number on motor ks4642/235
-
Caitlin at eSpares says...
It's possible you'll need motor code: ES552767. But best to get in touch with Customer Services to be absolutely sure (0844 9777 888)
Hi I have just watched your video re installing my new motor, unfortunately there is no clear indication as to where the red or blue wires go. it doesn't say live or neutral anywhere. The only definite difference is where the two connection terminals are, underneath on the reverse of the white plastic, one terminal has the number 8 and on the other has number 4 Or one end has a black lead going into a terminal and at the other end it has a uncovered wire going into the terminal. No sure which way to do it Please advise Many Thanks Tony
-
Rory at eSpares says...
Hi Tony, I'm be slightly nervous giving you exact instructions 'blind' - I don't want to be at fault for you electrocuting yourself! All I suggest is wiring the new motor in exactly the same way the old one is wired. Taking a photo of the old one before removing the wires can help here. Hope this helps.
How can I get the impeller off to gain access to the screws to change the belt on a Micro Compact 300 Model 9633095-01 1 Answer
Do I have to pull the impeller off to gain access to the screws. I need to replace the drive belt but I need to know how to gain access to them.
-
Rory at eSpares says...
Hi Moon, the motor that fits your Micro Compact 300 model is this one: http://www.espares.co.uk/part/lawnmowers/flymo/p/1116/283/0/0/956624/motor.html
-
Rory at eSpares says...
Hi Moon, the motor for your mower is this one: http://www.espares.co.uk/part/lawnmowers/flymo/p/1116/283/0/0/956624/motor.html
-
Rory at eSpares says...
Hi Moon, the motor for your mower is can be found here: http://www.espares.co.uk/part/lawnmowers/flymo/p/1116/283/0/0/956624/motor.html?ms=5150083003
SERIAL No. ON MY COMPACT 300 IS:_ 9633032-01 Is this motor suitable for this flymo
-
Rory at eSpares says...
Hi Alabe, this motor will fit your mower.
-
Rory at eSpares says...
Hi Boris4eva, the motor for your 9633095 mower is this one: http://www.espares.co.uk/part/lawnmowers/flymo/micro-compact-300-plus/p/1116/283/116/402333/956624/motor.html
Will this part fit my appliance?
Check Now