Siemens Tumble Dryer Temperature Limiter : 9000014369 Z300/20k/A2 Cable length 420mm Stock Number: ES766689
Genuine spare part for select Bosch and Siemens tumble dryers
Manufactured by Bosch
(This part fits select Siemens models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Temperature Limiter
The Thermal Limiter ensures your tumble dryer is always running safely by helping to prevent overheating. If the temperature limiter is faulty help restore your appliance back to optimum condition with this quality replacement from eSpares.
Genuine spare part for select Bosch and Siemens tumble dryers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
This is Bosch spares reference: 600157
5 Questions and 6 Answers
- if the tempreture sensor is open circuit does it stop the drier completely no lights etc on front panel
-
Chris at eSpares says...
No it remains closed until the temperature exceeds the setting of the cut out.
-
Dean at eSpares says...
Please see our advice centre article for help www.espares.co.uk/advice/symptom/tumble-dryer-keeps-stopping just copy and paste into your browser.
My Bosch tumble dryer does not heat up as hot as it used to do, clothes only partially dry and little water in the condenser tray. Tried re-setting the red thermostat cut off button. Is the temperature limiter faulty? 1 Answer
Model WTL 6103Gb/05, F No. 8401 200076. Checked the cut out thermostat for closed circuit - ok. checked the temp limiter for closed ciruit - it's open. Is the limiter the problem? Can it be replaced or have to replace the whole heating element?
-
Dean at eSpares says...
We believe that the limiter is normally closed until the temperature exceeds the setting of the cut-out, for more help see our video www.youtube.com/watch?v=trJXdqNBn7M just copy and paste into your browser.
Hi, I have Bosch WTV74103GB/07 that is not heating up, i've change the heating element for new from you and the temperature regulator just under the door, but still no heat. The heating element heats up for about 1min or so and then just cold air. I have check the filters. Do you think it could the temperature limiter that needs changing or is there any more thermostats than need changing. Thanks
-
Chris at eSpares says...
There are a number of sensors on your appliance. Stock Number: ES111441 Stock Number: ES766689 and Stock Number: ES1123510 Any of these may be causing your problem but do put in a damp cloth when trying as the machine may 'sense' no further heat is required.
Hi. I have a Bosch Exxcel WTE86304GB tumble dryer & it stops after about 2 mins if you run it on normal heat. By selecting the low heat button option ot works but takes ages to dry anything. I'm thinking its the temperature limiter but before I buy one where is the switch located and what does it look like? I think I have located it but as your part number says 'image coming soon' I want to be sure its the right part before I order, can you send a pic or a link to show what the limiter sensor/switch looks like please so I can confirm. Thanks
-
eSparesMalindi at eSpares says...
WTE86304GB is not the full model number of your appliance. Please re-check your model details and then give us the full model number. We should then be able to bring up a line drawing of your appliance and confirm the location of the part. This link should help you find the model details: http://www.espares.co.uk/findingmodelnumbers.aspx
Will this part fit my appliance?
Check Now
